$3 Per Year Web Hosting

Tuesday 6 July 2021

How to Clean Tarnished Gold

Pure gold won’t tarnish, but most gold materials aren’t entirely pure. This means that many gold pieces have the capacity to tarnish over time. For instance, rose gold is often yellow gold mixed with copper, and copper can tarnish.[1]The good news is that gold can be cleaned to shine like new by using basic household cleaning supplies. On the rare instance that you can’t remove tarnish with your standard cleaning materials, you can always step up to using ammonia to remove difficult stains.

[Edit]Steps

[Edit]Washing with Dish Soap

  1. Add a few drops of mild dish soap to a bowl of warm water. If your gold is tarnished, you can usually clean it with dish soap and water. Grab a small bowl and fill it with of warm tap water. Then, squirt a few drops of dish soap into your warm water and mix it for 10-15 seconds with a spoon.[2]
    Clean Tarnished Gold Step 1.jpg
    • Read the soap’s label before you use it to make sure that it’s free of phosphates, which tend to be too abrasive for gold.
  2. Soak your gold in the soap and warm water for 15 minutes. Delicately drop your object into the bowl and let it rest for at least 15 minutes. This will loosen the dirt and grime that is tarnishing it and make it easy to wipe off.
    Clean Tarnished Gold Step 2.jpg
    • If you happen to be cleaning jewelry with stones that are glued into it, you may run the risk of dissolving the glue if you leave your jewelry submerged for more than a few minutes.
  3. Remove your gold and scrub it with a soft toothbrush. Pick your item up by hand and hold it firmly in your nondominant hand. Use your other hand to scrub the surface of the gold with a soft toothbrush. Use a gentle back-and-forth motion to brush along the surface. Refrain from brushing aggressively, or you’ll risk damaging it.
    Clean Tarnished Gold Step 3.jpg
    • A toothbrush is excellent for reaching small crevices or openings in your gold, but you can also use a standard soft-bristle brush.
    • Do not clean your gold jewelry with anything abrasive, including paper towels. Gold can scratch very easily. Instead, use a soft cloth like a T-shirt or a dish cloth.[3]
  4. Rinse the gold in warm tap water to remove soap residue. Put a colander or spaghetti strainer at the bottom of your sink. This will ensure that smaller pieces won’t fall down the drain if you drop it. Then, run your gold under some warm water and rub each section between your thumb and forefinger. Do this twice to ensure that each section comes in contact with the water.
    Clean Tarnished Gold Step 4.jpg
    • The residue left by soap will make gold look dirty if you don’t remove it.
  5. Dry your gold by hand with a soft cloth to prevent water stains. Hold a soft cloth in your nondominant hand and place the gold object in the center of the cloth. Pick up an edge of the same cloth with your dominant hand and use your thumb and forefinger to carefully buff each piece of the gold by keeping the cloth between your fingers and the gold.
    Clean Tarnished Gold Step 5.jpg
    • Water spots will stick around if you don’t wipe them by hand.
    • Store gold jewelry in a jewelry container after you’re done.

[Edit]Cleaning with Baking Soda

  1. Boil of tap water in a tea kettle or small pot. Fill a tea kettle or pot with your tap water and place it on the stove. Turn the stovetop to the highest setting and wait for the water to boil.
    Clean Tarnished Gold Step 6.jpg
    • This method will not work with jewelry that has gemstones embedded in it, since baking soda can damage the quality of the stone.[4]
  2. Line a glass baking dish with a sheet of aluminum foil. Place a sheet of aluminum foil over the top of your baking dish. Press down against the opposite interior sides of the dish to flatten your aluminum foil against the bottom of your container. Use the open palms of your hand to pat the aluminum foil down against the edges and bottom of the pan.[5]
    Clean Tarnished Gold Step 7.jpg
    • The aluminum foil should be flush against the bottom and sides of your glass dish, with the shiny side of the foil facing up.
    • You’ll want to use a glass baking dish since it can easily handle the heat from the boiling water.
  3. Place your gold in the baking dish and cover it with baking soda. If you’re cleaning a tarnished chain, spread it out in the dish so that the gold links aren’t laying on top of one another. Sprinkle 1-1.5 tablespoons (14-21 grams) of baking soda so that each piece of your material is covered.[6]
    Clean Tarnished Gold Step 8.jpg
  4. Pour your boiling water into the pan and let it steep for 5 minutes. Slowly pour of boiling water into the dish. Pour it on top of the baking soda so that the gold is fully submerged. Let it rest at the bottom of the dish for 5 minutes.
    Clean Tarnished Gold Step 9.jpg
    • You don’t need to mix anything. The aluminum foil will help the baking soda and water react, and will mix them automatically.
  5. Remove your gold with a fork or tongs and rinse it in cold water. You can either fill a bowl with cold water or run your tap over a colander or strainer. Remove the gold by picking it up with tongs or a fork, and either submerge it in the bowl or hold it under the cold, running tapster for 30-45 seconds.
    Clean Tarnished Gold Step 10.jpg
    • If you’re using a fork to lift jewelry, scoop the teeth underneath any chains to avoid scratching or knotting it.
  6. Dry your gold with a soft cloth to remove any baking soda residue. Wrap your item in a soft cloth, and gently rub each section of the gold between your thumb and forefinger. Keep the cloth between your fingers and the gold while you buff it. Inspect it when you’re done to ensure that you didn’t miss any baking soda residue.
    Clean Tarnished Gold Step 11.jpg
    • You should let your gold continue to air dry for 5-10 minutes before storing it in a container.

[Edit]Dipping in Ammonia

  1. Fill a glass container of warm water and mix in of soap. Any glass container that can hold at least of liquid will work. Start by measuring and pouring your warm water and add it into your container. Mix it with your dishwashing soap by stirring it with a spoon.
    Clean Tarnished Gold Step 12.jpg
    • Ammonia can irritate skin, so you’ll need to wear rubber gloves to complete this cleaning process.[7]
  2. Mix of ammonia into your water and dish soap. Carefully pour your ammonia into the glass container and stir with a spoon. Ammonia has a strong odor, so work in a well-ventilated area. Open a window if you’re doing this at home.[8]
    Clean Tarnished Gold Step 13.jpg
    • If you can’t open a window or do this in a well-ventilated space, consider wearing a dust mask to keep dangerous fumes out of your lungs.
  3. Drop your gold into the glass container for 10 seconds. Delicately drop it by holding it a few inches or centimeters above the surface of your solution. Release the gold carefully so as to avoid any splashing. Wait 10 seconds before removing the gold with a pair of tongs.[9]
    Clean Tarnished Gold Step 14.jpg
    • Be sure to fully submerge the gold item in the ammonia mixture.
  4. Brush the gold with a soft-bristle toothbrush to remove tarnish. Hold your gold over the bowl and scrub each section of the tarnished gold with a soft-bristle toothbrush by using gentle back-and-forth strokes. Keep your arms pointed down towards the bowl while doing this to avoid any ammonia dripping down your gloves and on to your skin.[10]
    Clean Tarnished Gold Step 15.jpg
    • Make sure that you keep your rubber gloves on while handling the gold.
  5. Rinse the object under cold water and let it air dry. Place a colander or strainer at the bottom of your sink in order to avoid losing your gold. Hold it under a stream of cold water for 30-45 seconds while rotating it to ensure that every section is exposed to water. Let the gold air dry on a dry towel.
    Clean Tarnished Gold Step 16.jpg
    • You can also stuff your sink drain with a thick towel if you don’t have a colander or strainer.
  6. Wash your materials thoroughly with dish soap to remove the ammonia. Scrub any materials that came in contact with ammonia with dish soap and a clean sponge. Ammonia is dangerous, so you’ll want to ensure that you’ve removed all of it from any materials that you plan to use in the future.[11]
    Clean Tarnished Gold Step 17.jpg
    • Wash materials even if you plan on throwing them in the dishwasher. It’s better to be safe than sorry!

[Edit]Things You’ll Need

[Edit]Washing with Dish Soap

  • Dish soap
  • Bowl
  • Strainer or colander
  • Soft cloth

[Edit]Cleaning with Baking Soda

  • Tea kettle or small pot
  • Baking soda
  • Aluminum foil
  • Glass baking dish
  • Fork or tongs
  • Strainer or colander

[Edit]Dipping in Ammonia

  • Rubber gloves
  • Glass container
  • Water
  • Dish soap
  • Ammonia
  • Spoon
  • Tongs
  • Toothbrush
  • Sponge

[Edit]Tips

  • If you have white gold jewelry, it may appear more yellow over time. That's because white gold is typically plated with rhodium, and that plating can wear off.[12]

[Edit]References


[Edit]Quick Summary



from How to of the Day https://ift.tt/3jNvtWP
via Peter

No comments:

Post a Comment

$3 Per Year Web Hosting