As long as you know a few basic crochet stitches, you should be able to crochet a triangle without much difficulty. You could use a triangle stitch if you want to create a triangle pattern throughout a larger work, or you could create individual triangles using both row and round methods.
Steps
Method One: Triangle Stitch[1]
- Create a foundation chain. You will need to work chain stitches in multiples of three, then add one to complete the chain. For instance, your foundation chain could consist of 19 (18 + 1), 22 (21 + 1), or 31 (30 + 1) chain stitches.
- You will need to start your work by tying a slipknot onto the hook. See the "Tips" section for more detail.
- Also consult the "Tips" section for instructions on forming a chain stitch.
- Single crochet across the chain. Work one single crochet into the second stitch from your hook. After that, work one single crochet into each stitch of the previous row until you reach the end of the row.
- Turn the piece over when you reach the end of the row.
- If you do not know how to work a single crochet, check the “Tips” section for instructions.
- Work four chain stitches. Work these stitches directly from the loop already on your hook.
- This set of chain stitches will count as both a half double crochet and an additional set of two chain stitches.
- Yarn over as you pick up stitches. Skip the first stitch of your previous row. Then, wrap the yarn around the hook, insert it through the next stitch (the second stitch of the previous row), and catch the yarn on the other side. Pull the yarn back through to the front of the stitch.
- Repeat this process two more times, moving onto the next stitch in the previous row each time. When finished, you should have seven loops on your hook.
- This step starts the actual triangle stitch.
- Draw through seven loops. Yarn over the tip of the hook again, then draw this last bit of yarn through all seven loops previously gathered onto your hook.
- When finished, you will only have one loop on your hook.
- This step completes the actual triangle stitch.
- Work two chain stitches. Work these chain stitches from the loop already on your hook.
- This will create a gap in between your individual triangle stitches.
- Make another triangle stitch. Follow the same steps indicated above to create another triangle stitch.
- Yarn over the tip of the hook, then insert the hook through the last stitch you worked your previous triangle stitch into.
- Yarn over the hook from the back and pull the yarn back to the front of the stitch.
- Yarn over the hook, insert it into the next stitch, and catch the yarn from the back before pulling it to the front. Repeat once more with the following stitch.
- Once seven loops have been gathered on your hook, yarn over the hook and pull the yarn through all seven loops.
- This series of moves completes your second triangle stitch.
- Repeat to the end of the row. Chain two, then repeat another triangle stitch exactly as described in the previous step. Repeat this pattern until you reach the end of the row.
- Work one chain stitch and one half double crochet. Chain once, then work one half double crochet into the last single crochet stitch of the previous row.
- Turn the work over at the end of this row.
- Read more about half double crochets in the “Tips” section.
- Chain once. Work one chain stitch off the loop on the hook to advance to the next row.
- Single crochet across the row. The placement of your single crochets will vary based on where they land in the row.
- Single crochet once in the first stitch.
- Single crochet once in the next "chain one" space from the previous row.
- Single crochet twice into each of the "chain two" spaces from the previous row.
- Single crochet once into the second loop of your original turning chain from the previous row.
- Turn the work when finished with this row.
- Repeat as needed. At this point, you should have your foundational chain, your prep row, your first row of triangle stitches, and your second "in between" row. Repeat the steps used for the triangle stitch row and the "in between" row, alternating back and forth, until your project reaches your desired length.
- Cut the yarn. Pull the tail through the loop on your hook and tighten it as much as possible to tie off the work. Weave the excess tail into the back of your work to hide it from sight.
Method Two: Triangle in Rows[2]
- Create a foundation chain. Work a starting chain of 13 chain stitches.
- You'll need to start your work by tying a slipknot onto the hook. If you do not know how to do this, see the "Tips" section for more detail.
- You can also check the "Tips" section for instructions on working a chain stitch.
- Work 12 single crochets across the chain. Skip the first stitch of your previous row, then work one single crochet into each of the remaining stitches until you reach the end of the row.
- When finished, this row should have 12 stitches.
- Check the “Tips” section for more information about working single crochets.
- Decrease twice in the next row. Work one single crochet decrease across the next two stitches of the previous row. Single crochet once in each of the next eight stitches, then work another one single crochet decrease into the final two stitches of the row.
- When finished, you should have 10 stitches in this row.
- If you do not know how to work a single crochet decrease, check the “Tips” section for instructions.
- Single crochet in each stitch. For the next row, simply work one single crochet into each stitch of the previous row.
- This row should have a total of 10 stitches.
- Decrease twice in the fourth row. Work one single crochet decrease into the first two stitches of the third row. Single crochet once into each of the next six stitches, then work another one single crochet decrease into the last two stitches of the row.
- There should be eight stitches in this row when you finish it.
- Single crochet in each stitch for the fifth row. Work one single crochet into each stitch of the fourth row to complete the fifth row.
- This row should also have 8 stitches, just like the previous row had.
- Repeat this pattern for another seven rows. Continue working rows with two single crochet decreases in them, separated by rows of nothing but single crochets. Repeat this for another seven rows, until you reach the twelve row.
- Row six should have six stitches (one single crochet decrease, four single crochets, and one single crochet decrease).
- Row seven should have six stitches (six single crochets).
- Row eight should have four stitches (one single crochet decrease, two single crochets, and one single crochet decrease
- Row nine should have four stitches (four single crochets).
- Row ten should have two stitches (one single crochet decrease, one single crochet, and one single crochet decrease).
- Row eleven should have two stitches (two single crochets).
- Row twelve should have one stitch (one single crochet decrease).
- Single crochet around the edge of the piece. The basic triangle is finished at this point. To smooth out the edges, work one single crochet into each stitch around the sides of the work and three single crochets into the gap at each point.
- Cut the yarn, leaving a 2 inch (5 cm) tail. Pull this tail through the loop on your hook and tighten it to tie off the triangle. Weave the tail into the back of the work to hide it.
- Cut the yarn, leaving a 2 inch (5 cm) tail. Pull this tail through the loop on your hook and tighten it to tie off the triangle. Weave the tail into the back of the work to hide it.
Method Three: Triangle in the Round
- Make a foundation circle. Work four chain stitches from the slipknot loop on your hook. Slip stitch the first and last stitches of this chain together to form a ring.
- Check the “Tips” section for instructions on how to make a slipknot, chain stitch, and slip stitch.
- Work six chain stitches. Work this secondary chain directly from the loop already on your hook.
- These six stitches will count as your first double crochet , as well as the first corner of your first triangle round.
- Double crochet three times. Work three double crochets into the center of your ring. Chain three times to separate this set from the next.
- Check the “Tips” section if you need further detail on working double crochets.
- Double crochet another three times. Work another three double crochets into the center of the ring, then chain three more times off the final double crochet in the set.
- Close the first round. Make two more double crochets into the center of the ring. Slip stitch final loop of the second double crochet into the third chain stitch of the six-chain series you worked when advancing to this round.
- This step completes the first triangle round. You can end the triangle here, or you can keep working additional rounds to expand it outward.
- Advance to the next round. Work six chain stitches off the loop on your hook.
- As before, these chains will act as the first double crochet and the first corner of this round.
- Work three double crochets. Work these double crochets into the first "chain three" space of your previous round. Chain once to separate this set from the next.
- Double crochet two sets in the next corner. In the next corner gap, double crochet three times, chain three times, and double crochet another three times. End this double set by chaining once.
- Double crochet around the rest of the round. You will need to repeat the previous step in the next corner space. Once you return to the first corner space, work two double crochets into the space. Use a slip stitch to join this final double crochet to the third chain of your original six-stitch chain from this round.
- Advance to the next round. Work six chain stitches off the loop on your hook.
- This chain serves as both the first double crochet and the first corner of your third round.
- Follow a similar pattern to complete this round. You will need to follow the same steps used on the previous round to complete this round. The only difference is that you will have chain spaces to work with as well as corner spaces.
- In the first corner space, work three double crochets, then chain once.
- In each corner space, double crochet three times, chain three times, then double crochet another three times. Chain one at the end of the set.
- In each non-corner gap, double crochet three times, then chain once.
- When you reach the first corner space of this round, double crochet twice into the space. Join this set with the third chain of your six-stitch chain using a slip stitch.
- Repeat as needed. The triangle can be used as is, but if you want to make it bigger, you only need to follow the previous step until you reach your desired size. Make sure that the final stitch you make is a slip stitch.
- Cut the yarn, leaving a 2 to 3 inch (5 to 7.6 cm) tail. To knot off the triangle, pull this tail through the loop on your hook as tight as possible. You can weave the remainder of the excess tail into the back of the triangle to hide it.
Tips
- To make a slip knot:
- Cross the attached end of the yarn over the working end to create a loop.
- Push the attached side of the yarn into this loop from underneath it, creating a second loop. Tighten the first loop to secure the second loop.
- Insert the crochet hook into the second loop and tighten it.
- To make a chain stitch:
- Wrap the attached side of the yarn in between the hook and the loop already on the hook.
- Pull this yarn through the loop on your hook to complete the stitch.
- To make a single crochet:
- Slide the hook into the designated stitch.
- Catch the yarn with your hook and pull it through to the front of the stitch. There should be two loops on your hook.
- Yarn over the hook
- Pull the yarn-over through both loops on your hook to complete the stitch.
- To make a single crochet decrease:
- Insert the hook into the next stitch. Catch the yarn, then draw it back through to the front of the stitch.
- Insert the hook into the stitch after that. Catch the yarn again and draw it back through the front of this stitch. There should be three loops on the hook.
- Yarn over the hook, then pull this yarn-over through all three loops to complete the stitch.
- To make a half double crochet:
- Yarn over the hook, then insert it through the designated stitch.
- Yarn over the hook again and pull that yarn back through to the front of the stitch.
- Yarn over the hook once more, then pull this yarn-over through all three loops on your hook to finish the stitch.
- To make a double crochet:
- Yarn over the hook.
- Slide the hook into the designated stitch.
- Catch the yarn with the hook and pull it back through to the front of the stitch. You should have three loops on your hook.
- Wrap the yarn over the hook again, then draw the yarn through the first two loops on your hook.
- Yarn over the hook once more, and draw it through the last two loops on the hook to complete the stitch.
- To make a slip stitch:
- Insert the hook through the designated stitch.
- Yarn over the hook.
- Pull the yarn through the all loops previously gathered on the hook to complete the stitch.
Things You'll Need
- Crochet hook
- Yarn
Sources and Citations
Cite error: <ref> tags exist, but no <references/> tag was found
from How to of the Day http://ift.tt/1MGQRoh
via Peter
No comments:
Post a Comment