$3 Per Year Web Hosting

Thursday, 6 October 2022

How to Read a Hospital Monitor

When you visit a loved one in the hospital, you're likely to find your eye drawn to the monitor at their bedside. If you're wondering what all those wavy lines, numbers, and abbreviations mean, you've come to the right place! Read on to learn how to read and understand the patient monitor so you'll know what all those values can tell you about your loved one's condition. And if you have any questions or concerns, don't hesitate to ask a doctor or nurse on duty.

[Edit]Things You Should Know

  • Read the numbers on the right-hand side of the monitor to learn the patient's pulse rate, body temperature, and blood pressure.
  • Use the respiratory and oxygen saturation rates to keep tabs on the patient's breathing and circulatory system.
  • Watch the waveforms for any signs of irregular heartbeat or breathing.

[Edit]Steps

[Edit]Pulse rate (PR)

  1. A normal resting pulse rate is between 60 and 100 beats per minute. This number is typically in the top right-hand corner of the monitor screen and tells you how fast the patient's heart is beating. The number might go up when the patient sits up, talks, or moves around.[1]
    Read a Hospital Monitor Step 1.jpg
    • Someone who is injured or ill is likely to have a higher resting pulse rate than normal, but this is usually no cause for alarm. The monitor will issue an alert if the number gets too high.
    • Athletes who do a lot of cardiovascular training, such as cyclists or long-distance runners, might have a normal resting pulse rate of around 40 beats per minute.[2]

[Edit]Body temperature (TEMP)

  1. The normal temperature range for adults is . This is typically the second number you'll see on a patient monitor, directly under the pulse rate. A body temperature over is considered a fever, while anything below is considered hypothermia.[3]
    Read a Hospital Monitor Step 2.jpg
    • It's normal for a patient's body temperature to go up a degree or so if they're eating or active. Their temperature might also go down a degree or two if they're sleeping.

[Edit]Blood-oxygen level (SpO2)

  1. Normal oxygen levels are between 95 and 100. This number is a percentage that tells you how much oxygen is in the patient's blood. Even a little below 95 is usually okay, but the patient might require supplemental oxygen if the number drops below 90.[4]
    Read a Hospital Monitor Step 3.jpg
    • Oxygen saturation is typically monitored using a pulse oximeter, a small clip on the patient's finger or toe.
    • The SpO2 number isn't always displayed on a patient monitor, but you'll usually see it if the patient is experiencing a respiratory condition, such as pneumonia or COVID-19.

[Edit]Respiration rate (RR)

  1. The normal respiration rate for adults at rest is 12-16 breaths per minute. Quite simply, this is the number of breaths the patient takes in one minute. A patient's respiration rate typically increases if they have a fever and might not be any cause for alarm. However, you do want to make sure the patient isn't having any difficulty breathing.[5]
    Read a Hospital Monitor Step 4.jpg
    • If the patient seems to be having trouble breathing, such as if they're gasping for breath or breathing very shallowly, press the call button to have a nurse come and evaluate their condition.

[Edit]Systolic blood pressure (SYST)

  1. Normal systolic blood pressure is between 90-120 mm Hg. This number, together with the diastolic blood pressure number, is typically found in the bottom-right corner of the screen. Systolic blood pressure tells you the amount of force exerted on the patient's arteries at the moment when their heart is beating.[6] High blood pressure occurs with systolic blood pressure of 140 mm Hg or greater.[7]
    Read a Hospital Monitor Step 5.jpg
    • A patient's systolic blood pressure is read together with their diastolic blood pressure—even though the numbers might appear separately, they're expressed as a single unit.

[Edit]Diastolic blood pressure (DIAS)

  1. Normal diastolic blood pressure is between 60-80 mm Hg. Diastolic blood pressure is the force exerted on the patient's arteries between heartbeats, or when their heart is at rest.[8] High blood pressure occurs with diastolic blood pressure of 90 mm Hg or greater.[9]
    Read a Hospital Monitor Step 6.jpg
    • When you read a patient's blood pressure, express it as a ratio with the systolic blood pressure over the diastolic blood pressure. For example, if the monitor showed systolic blood pressure of 110 and diastolic blood pressure of 75, you'd say the patient's blood pressure is "110 over 75."

[Edit]ECG waveform

  1. An electrocardiogram (ECG) records the electrical activity of the heart. This is usually the top wavy line on the hospital monitor. You can think of it as an image of the pulse rate, which is displayed right next to it. Healthcare practitioners study extensively to learn how to read and interpret an ECG waveform. As the loved one of a patient, all you really need to know is that each spike or peak corresponds to a heartbeat. If the patient has a regular heartbeat, these spikes will occur the same number of little blocks apart from each other.[10]
    Read a Hospital Monitor Step 7.jpg
    • The ECG on a patient's hospital monitor typically comes from lead II, electrodes attached to the patient's right arm and left leg. If the ECG shows any irregularities, doctors or nurses will confirm the issue by attaching additional leads.

[Edit]SpO2 waveform

  1. Use the SpO2 waveform to monitor the patient's blood flow. The SpO2 waveform is the wavy line under the ECG waveform, usually blue but sometimes red. As long as each crest on the SpO2 waveform matches up with a spike on the ECG right above it, you can rest assured that oxygenated blood is circulating efficiently with each heartbeat.[11]
    Read a Hospital Monitor Step 8.jpg
    • Like the ECG, healthcare professionals undergo a lot of training to learn how to interpret these waveforms. It helps them see how well the heart is pumping blood, particularly to the patient's extremities.

[Edit]Respiration waveform

  1. The respiration waveform shows how well the patient is breathing. Most patient monitors don't have a respiration waveform, but it'll be there if they have respiratory issues. This is the wavy line at the bottom of the screen and is usually yellow or white.[12]
    Read a Hospital Monitor Step 9.jpg
    • Doctors and nurses use this waveform to identify apnea (when the patient suddenly stops breathing) or dyspnea (when the patient has difficulty breathing).

[Edit]Tips

  • Visiting a loved one in the hospital can be an overwhelming experience. Remember to take breaks to recharge. Most hospitals also have counseling services available if you need to talk to someone.[13]

[Edit]Warnings

  • Avoid focusing too much on a single number. Doctors and nurses will look at the vital signs together and take the context into consideration. A single number out of normal range usually isn't cause for concern.[14]
  • If the monitor or another piece of equipment starts beeping, call a nurse to come and check it out.[15]

[Edit]References



from How to of the Day https://ift.tt/cTjxyOP
via Peter

How to Cook Sausages

Sausages make a fantastic meal, no matter which way you cook them. Try them pan-fried on the stove for a quick dinner or toss them in the oven for a hands-off meal. You can also simmer them on the stove so they're extra tender, or throw them on the grill to give them a rich, smoky flavor. If you're ready to get cooking, read on!

[Edit]Things You Should Know

  • Keep the sausages intact—there's no need to prick them before you cook them. Poking the sausages before cooking can actually dry them out.
  • To cook the sausages in about 20 minutes, cook them on the stove or roast them in the oven. You can also cook them on the grill in about 10 minutes.
  • Use an instant-read meat thermometer to check that the sausages are cooked to —the food-safe temperature for sausages.

[Edit]Steps

[Edit]Pan-Frying Sausages

  1. Heat of olive oil in a skillet over medium heat.[1] Use a heavy-bottomed pan like a cast-iron skillet since they conduct heat really well. Give the oil a few minutes to heat up in the pan before you add the sausages.[2]

    • If you don't have olive oil, it's fine to use butter or vegetable oil.
  2. Cut the sausages in half lengthwise if they're large. Narrow or small sausages cook quickly in a skillet, but big sausages like andouille take a lot longer to cook. To cut back on cooking time and give your sausages more flavor, slice them in half.[3]

    • Feel free to cut the sausages into even smaller pieces.
    • Cutting the sausages increases their surface area so more of the sausage caramelizes in the skillet. This translates to amazing flavor!
  3. Add the sausages to the skillet and cook them for 5 minutes. If you cut the sausages, place them flat-side down in the skillet. If they're whole, just lay them in the skillet so there's a little space between each one. Then, cook the sausages, turning them occasionally with tongs, until they're browned.[4][5]

    • If the sausages don't sizzle when they hit the skillet, turn up the heat to medium-high.
    • If you'd like to cook a lot of sausages, use a large skillet or cook them in batches.
  4. Add of water and cook them for another 7 to 15 minutes. Cover the skillet as soon as you add the water so you trap the steam. Then, cook the sausages until they're completely done in the center. This method ensures that the centers of the sausages cook completely, but you still get that rich, dark exterior. To check if the sausages are done, insert an instant-read meat thermometer into the center of the thickest sausage to see if it has reached .[6]

    • Keep in mind that if you're cooking small sausages, like breakfast sausages, they may only need 5 to 10 minutes to finish cooking.
    • Remove the lid carefully so steam doesn't rush into your face.
    • Rest the sausages for a few minutes before you serve them. Resting helps redistribute juices within the meat so it won't spill out when you cut the sausages.

[Edit]Roasting Sausages in the Oven

  1. Preheat the oven to and line a sheet with foil. The foil prevents the sausages from sticking to the baking sheet and it makes cleanup easier. However, if you don't want the sausages to cook in their juices, which can be fatty, set a metal rack on the foil-lined sheet so the juices drip down as the sausages cook.[7]
    Cook Sausages Step 5 Version 7.jpg
  2. Place the sausages on the pan. Set them directly on the foil or the metal rack on the sheet. Leave at least of space between each sausage so heat can circulate evenly.[8]

    • Don't prick the sausages before you cook them since this causes the juices to run out faster, making the sausages dry.
    • For an easy sheet-pan dinner, spread chopped root vegetables like onions, potatoes, and peppers alongside the sausages. Drizzle the vegetables with a little olive oil and season them with salt and pepper.
  3. Bake the sausages for 15 to 20 minutes, turning them at the halfway mark. Place the tray in the hot oven and cook the sausages until they're browned on the outside—use tongs to turn them halfway through the cooking time so they brown evenly. Keep in mind that if you're cooking large sausages, you may need a few more minutes, so check them every 5 minutes until they look done.[9]
    Cook Sausages Step 7 Version 7.jpg
    • Smaller or narrow sausages take less time to cook, so check them earlier.
  4. Remove the sausages once they reach . To test if the sausages are done cooking, carefully insert an instant-read meat thermometer into the center of the thickest sausage to see if it has reached . Then, set the tray of sausages aside to rest for a few minutes before you serve them.[10]
    Cook Sausages Step 8 Version 7.jpg
    • Resting the sausages for a few minutes helps them reabsorb juices. This way, they won't leak all over your serving platter when you cut into them.

[Edit]Simmering Sausages on the Stovetop

  1. Place your sausages in a pan and pour in water. Add enough water so that it comes 1/3 of the way up the sides of the sausages. There's no need to bring the water to a boil first—if you add sausages to boiling water, they're likely to split open or splash you when you add them to the pan.[11]

    • For an easy way to add flavor, replace the water with broth, stock, beer, wine, or tomato sauce.[12]
    • Simmering is a great way to gently cook sausages like brats, hot dogs, or knockwurst because it's really hard to dry them out. If you tend to overcook sausages, try simmering them.
  2. Turn the heat to high and simmer the sausages. Keep the lid off of the pot so water can evaporate as the sausages cook. Use tongs to turn them halfway through the cooking time—you'll see that they look opaque once they're cooked on 1 side.[13]

    • If the water is boiling too vigorously, turn the heat down a little so the water bubbles gently.
    • Don't use forks to turn the sausages, or you might accidentally prick them and release all their flavorful juices.
  3. Cook the sausages for 20 minutes or until they reach . Keep simmering the sausages until they look thoroughly cooked and most of the water evaporates.[14] Keep in mind that you can't tell if they're actually done by sight alone, so insert an instant-read meat thermometer into a sausage to check that it's reached .

  4. Sear the sausages in a skillet if you want to give them extra color. While simmering the sausage is a simple way to cook them, they won't have the distinctive brown color that most sausages get. To fix that, heat a spoonful of oil in a skillet over medium-high heat and add the cooked sausages. Use tongs to turn the sausages frequently while you sear them for a few minutes. Remove the sausages once they're as brown as you like.[15]

    • If you've got your grill going, sear the sausages on the grill instead of in a skillet. You'll add wonderful smoky flavor to the meat.
  5. Remove the sausages and rest them for a few minutes before serving. Turn off the burner and use tongs to move the sausages to a platter. Cover them loosely with foil for a few minutes to rest the meat. Then, slice them and serve them or stick them in a bun for a great sandwich.[16]

[Edit]Grilling Sausages

  1. Heat a gas or charcoal grill to medium heat. If you're lighting a charcoal grill, fill a chimney starter with briquettes and light them. Once the coals are hot and lightly covered with ash, dump them on 1 side of the grill grate. If you're using a double-knob gas grill, turn 1 to high heat and the other to low heat.[17]

    • This creates a 2-zone fire, which gives you a lot of control when grilling the sausages.
  2. Oil the grill grates and lay the sausages on the grill. Scrunch up a piece of cotton fabric or a paper towel and grip it with a pair of tongs. Dip the cotton or paper towel into vegetable or canola oil and wipe it onto the grill grate.[18] Then, place your sausages on the hot side of the grill—the side with the high heat or briquettes.

    • Oiling the grates prevents the sausages from sticking so it's really easy to turn them.
    • Leave space between each sausage so they grill evenly. If your sausages are connected by casing, separate them before you toss the sausages on the grill.
  3. Cover the grill, but turn the sausages every few minutes. Carefully lift the lid and use the tongs to turn each sausage over so they don't get too dark on 1 side. If it looks like the grill is too hot and you're worried that the sausages are going to burn before the center cooks, move them to the cool side of the grill.[19]

    • The sausages are less likely to burn when you cook them over indirect heat—the side that's turned to low or doesn't have briquettes.
  4. Grill the sausages for 8 to 10 minutes or until they reach . The sausages will look browned on the outside, but it's important to cook them until the centers are safe to eat. To check, insert an instant-read meat thermometer into the center of a sausage. Pull them off the grill once they're at .[20]

    • Serve the sausages right away or loosely cover them with a piece of aluminum foil to keep warm until you're ready to eat.

[Edit]Video

[Edit]Tips

  • Avoid relying on the color of the juices or the inside of the sausages to determine if they're done cooking. Some types of sausage, especially ones made with pork, have a slight pink color that can make it hard to tell if they're safe to eat. Instead, insert an instant-read meat thermometer to check that the sausages have reached .
  • Use any of these methods to heat fully-cooked sausages like smokies, keeping in mind that they' won't need as long to heat up.

[Edit]Related wikiHows

[Edit]Things You'll Need

[Edit]Pan-Frying Sausages

[Edit]Roasting Sausages in the Oven

[Edit]Simmering Sausages on the Stovetop

[Edit]Grilling Sausages

[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/VRk9qCD
via Peter

Wednesday, 5 October 2022

How to Sew

Sewing is not only a useful skill but a great and fun way to pass the time. There are tons of things you can do with a needle and thread, and all you need are a few basic skills and some imagination! In this article, we’ll show you how to sew a basic straight stitch by hand and introduce you to other beginner stitches you can try. Keep reading because soon you’ll be a sewing pro!

[Edit]Things You Should Know

  • Practice making a straight stitch to learn the basics of sewing by hand.
  • Try other beginner stitches like the basting, zig-zag, and slip stitch for specific sewing or project needs.
  • Create decorative details on fabric with simple stitches like the backstitch or blanket stitch.

[Edit]Steps

[Edit]Sewing a Straight Stitch

  1. Thread your sewing needle and tie the ends of the thread together. When it comes to thread, more is better. Cut at least two times the amount of thread you think you’ll need just to be safe. Then, take one end of the thread between your thumb and forefinger and glide it through the eye of the needle. Guide the thread through the needle until the thread is even on both sides. Pinch the ends of the thread together and tie a small overhand knot at the end.[1]

    • If you have trouble threading the needle, no worries! Look for sewing needles with larger eyes. These will make threading easier but leave bigger puncture holes.
    • Sewing needles come in a variety of sizes, ranging from 8 to 19 to represent the needle’s gauge. The smaller the number, the larger the gauge and thicker the needle will be.[2]
    • Cut the thread with sharp scissors to keep the ends from fraying.
    • Lick the end of the thread, so it’s easier to glide through the needle’s eye.
  2. Pierce the needle through the side of the fabric people won’t see. This side of the fabric is often referred to as the “wrong side,” and is typically the inside part of a piece of clothing or stuffed toy.[3] For example, if you’re sewing a seam, turn the garment inside out so the “wrong side” is facing out. Poke the needle into the fabric on the far edge of where your stitch will start. Then, pull the needle and thread through until the thread’s knot hits the fabric.[4]

    • Use gentle pressure when poking and pulling the needle to avoid yanking the thread through the fabric.
    • If your knot goes through the fabric, simply make a bigger knot and try again.
  3. Guide the needle through the other side of the fabric. Flip your fabric over and pierce the needle through about a from where you poked the first hole, following a straight line. Pull the entire length of the thread through the fabric until you feel resistance—this is your first stitch.[5]

    • Draw a line on your fabric with a pencil or fabric chalk or marker to use as a guide while you sew.[6]
    • Pull the thread tight enough for the stitch to lay flat on the fabric but not so tight that it bunches the fabric underneath.
    • The bigger the space between your needle pokes, the longer your stitches will be.
  4. Continue stitching until you reach the end of the fabric. With each poke of the needle, turn the fabric over. Keep the same distance between stitches by poking the needle in and out with an equal space between each hole. Continue sewing till the end of the fabric or pattern.[7]

    • A straight stitch is often called a running stitch because it continues in a straight line following a dashed-line pattern, similar to a running path.
  5. Finish the stitching with a knot. Poke the needle through the wrong side of the fabric, but only pull the thread halfway through (this creates a loop of thread). Weave the needle up into the loop and pull snugly until the thread is flat against the fabric—you’ve successfully made a knot! Repeat this 2 to 3 times to ensure the knot stays in place.[8]

[Edit]Other Basic Stitches for Beginners

  1. Hold two layers of fabric together temporarily with a basting stitch. Fold a piece of fabric to create two folds, or lay two pieces of fabric on top of each other. Pinch together the layers of fabric and insert the needle horizontally. Keeping the needle parallel, drive it into the fabric about away from your first hole. Pull the needle through to make your first stitch. Repeat this process until you reach the end of your pattern or fabric.[9]

    • This type of stitch can be used to replace sewing pins as it can be easily removed.
  2. Use a zig-zag or catch stitch to help fabric stretch. Pierce the needle through the wrong side of the fabric where you’d like the stitch to start. Pull the thread through, then bring the needle down into the fabric at a diagonal about from your first hole. Push the needle back up through the first hole to create a point—this is your first stitch. Repeat this process going left to right until, creating points by sliding the needle through the first hole of the stitch.[10]

    • This stitch is most commonly used to sew in elastic waistbands.[11]
  3. Create an invisible stitch with a slip stitch. Also known as a ladder stitch, a slip stitch binds and closes two pieces of fabric together. To make a slip stitch, pierce the needle on the inside fold of the fabric, so the knot is hidden inside the folded gap or seam. Make a horizontal stitch on top of the opposite fold across from where you first pierced the needle. Pull the thread through to create a stitch. Continue sewing until you reach the end of the seam or gap.[12]

    • This stitch is often used to close stuffed animals after they’re stuffed.
  4. Sew two pieces of fabric tightly together with a backstitch. Backstitching is basically a straight stitch without any gaps. Push a threaded needle through the underside of 2 pieces of fabric about away from the fabric’s edge. Bring the needle down through the fabric at the edge, moving back from the hole you previously made. Drive the needle horizontally underneath the fabric so that it’s parallel to your body. Note that if the tail end of your thread is bisecting where the needle is going in and out of the fabric, your stitches will be even. Pull the needle through to create your stitch.[13]

    • This stitch is often used to embroider letters and sew pieces of clothing together.
  5. Make a bound seam with a whipstitch. Also known as the overcast stitch, a whipstitch connects 2 pieces of fabric. Sew a whipstitch by bringing 2 edges of fabric together (in this case, these edges are referred to as flaps). Stab a threaded needle through the corner of one flap individually, as this hides the thread’s knot. Pinch the flaps together, and push the needle through both layers from front to back. Pull the thread until it’s flush with the fabric to make your first stitch. Bring the needle back to the front and repeat.[14]

    • This stitch can be used to hem jeans and close the sides of pillows, cushions, and stuffed animals.
  6. Create a decorative border using a blanket stitch. To sew a blanket stitch, put 2 pieces of fabric together or fold a piece of fabric in half. Pierce the edge of one of the fabric flaps with a threaded needle and pull. Hold the fabric flaps together and bring the needle through both of them. Weave the needle up into the loop of thread at the top of the fabric, and pull tightly until the thread is flush with the fabric. Create your next stitch about away from the first, piercing the same side of fabric as the first stitch.[15]

    • This stitch is commonly used to make napkins, stuffed animals, and blankets.

[Edit]Video

[Edit]Tips

  • Cotton, linen, and flannel are great beginner fabrics to work with because they’re easy to hold, bend, and pierce a needle through.
  • Always prewash a piece of fabric or clothing before sewing. This way, it won’t change size after you’ve finished sewing. Simply read the label on your fabric and follow the washing instructions.[16]
  • Consider ironing your fabric before you start sewing if it’s wrinkly to help you control the movement of the fabric better and make even crisp folds.
  • Consider practicing with a lighter color fabric and darker colored thread so you can see your stitches easily and learn from any mistakes.
  • Use a thimble to avoid needle pricks, especially when you’re just learning how to sew. Simply place the thimble on your thumb or forefinger and use it to push the needle through the fabric.
  • If you’re right-handed, stitch from right to left. If you’re left-handed, stitch from left to right.[17]

[Edit]Things You’ll Need

[Edit]Related wikiHows

[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/gZD2GOe
via Peter

How to Eat Guava

Guava are a delicious fruit whose juice has, on occasion, been referred to as 'the nectar of the gods.' Don't just get caught up on the juice--whole guava can be a sweet snack that will make you feel like you're in paradise even when you're sitting in your cubicle. Read this wikiHow to learn how to select, prepare, and eat guava.

[Edit]Steps

[Edit]Picking out the Perfect Guava

  1. Look for the softest guava you can find. The softer a guava is, the sweeter and more delicious it will be. Keep in mind that because guavas are best when extremely soft, they are also extremely perishable. Once you purchase or pick your guavas, you should have about two days before they go bad, depending on how ripe the fruit is when you purchase it.[1]
    Eat Guava Step 1 Version 3.jpg
    • In order to tell if a guava is ripe, squeeze it gently. If it gives under your fingers, its ripe.
  2. Look for any blemishes on the guava. You want to try to select guavas that are blemish-free. Blemishes or bruises can mean the fruit is bad or will not taste good.
    Eat Guava Step 2 Version 3.jpg
  3. Check the color of the guava. Ripe guavas are those that have gone from bright green to a softer yellowish-green color. If you see a touch of pink on the fruit, it is in its prime. If you don't find any that are yellow, you can always buy green guava and wait for them to ripen.[2]
    Eat Guava Step 3 Version 3.jpg
  4. Smell before you select. A perfectly ripe guava is one that you can smell without even putting it to your nose. It should smell sweet and slightly musky. If you have eaten a guava before, look for guavas that smell like they taste.[3]
    Eat Guava Step 4 Version 3.jpg

[Edit]Washing and Cutting

  1. Wash your guavas. You should wash the entire guava, as the rinds are actually edible. Rinse the fruit with cold water in an effort to quell any bacterial growth. Pat your guavas dry with paper towels.
    Eat Guava Step 5 Version 2.jpg
  2. Place your guava on a cutting board. Using a knife, slice your guava in half. Serrated knives usually work best when cutting open a guava. Some guavas have pink flesh, some have white flesh.
    Eat Guava Step 6 Version 2.jpg
    • You can either cut them in half or slice them up into thinner slices.[4]
  3. Eat your guava. You can either eat the whole guava (rind and all) or scoop out the insides. Either way, you're in for a delicious treat. Some people like to put seasonings on their guavas like soy sauce, salt, sugar, or even vinegar.
    Eat Guava Step 7 Version 2.jpg
  4. Store any guava you don't eat. You can wrap uneaten guava halves in plastic wrap and store them in the fridge for up to four days. If you don't think you will eat the guavas within four days, you should freeze your guava. Frozen guavas can stay in the freezer for up to eight months.[5]
    Eat Guava Step 8 Version 2.jpg

[Edit]Other Ideas for What to do with Guava

  1. Want to add a touch of the tropics to your next BBQ? Make guava barbecue sauce, a delicious sweet and salt combo that will make you feel like you're feasting in paradise.
    Eat Guava Step 9.jpg
  2. Try making guava pastries. Bored with the classic berry danish? Why not try adding some excitement to your morning meal.
    Eat Guava Step 10.jpg
  3. Make delicious guava jello. Skip the normal jello flavors dive and into something a bit more tropical. You can even make jello with actual guava chunks in it!
    Eat Guava Step 11.jpg
  4. Step up the classic mimosa with some guava juice. Rather than mixing orange juice with sparkling wine, try some guava juice in a Hermosa mimosa instead. Just pour the sparkling wine, a dash of guava juice and two or three maraschino cherries.
    Eat Guava Step 12.jpg

[Edit]Sample Recipes

[Edit]Video

[Edit]Tips

  • Know when it's ripe--guava usually turns yellow, maroon, or green when it is ripe.
  • Be careful when eating guavas as they do have seeds. These seeds are edible but are hard to chew, so be careful when giving small children guavas.
  • Here in Mumbai (and probably everywhere in India) street vendors sprinkle a little salt and chilli powder on guava slices. Delicious!

[Edit]Related wikiHows

[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/YmMj57z
via Peter

How to Become Valedictorian

Weird Al Yankovic, Alicia Keys, and Jodi Foster. What do all of these celebrities have in common? They were all valedictorians of their class. Though being valedictorian won't make you a supermodel or singer, it can set you on an impressive path that can lead you to succeed in your college career and in the world at large. All you need is to have mental toughness, endurance, and an unbeatable work ethic. So how do you do it? Just follow these steps.

[Edit]Steps

[Edit]Getting Ready

  1. Start young. Unfortunately, in most cases, you can't just waltz into your high school on the first day of freshman year and decide to be valedictorian. You'll need to have proved yourself in middle school by taking the most rigorous math and English courses that your middle school had to offer. Some middle schools don't have tracking for their classes, but some do offer Honors courses as early as seventh or eighth grade. Being in these courses will set you on a path to honors courses in high school, so make sure you've laid the groundwork for this.
    Become Valedictorian Step 1 Version 2.jpg
    • You can move up in English more easily, but once you're "locked" into a math track, it'll be harder to move ahead. For example, if you're in regular Algebra in 8th grade, you'll have to go to regular Geometry in 9th unless you've really proven yourself. If you can take two math classes, as this can help you get ahead.
  2. Learn how your school chooses its valedictorian. Some schools rank students with an unweighted GPA, while others award extra points for harder classes.[1] Most schools do offer extra points for taking harder courses so you should aim to take these; and even if your school doesn't offer extra points for harder courses, you should still aim for success; after all, if you want to be valedictorian, then you probably want to go to a top-notch school, which means you'll have to take the most challenging classes anyway.
    Become Valedictorian Step 2 Version 2.jpg
    • For example, if your school does use a weighted GPA to determine valedictorian, then you may receive a 4.0 for an "A" in regular classes, a 5.0 for an "A" in honors classes and a 6.0 for an "A" in AP classes.
    • A valedictorian also typically gives a graduation speech in front of their classmates. But if this is the part that appeals to you the most, then make sure that the speech-giver is the valedictorian. Some schools have the student body president give a speech, some have students vote for which student should give the speech, while others have the valedictorian and the student body president and another student give a speech.
    • Some schools have more than one valedictorian -- or as many as 29![2]
  3. Choose your classes wisely. If your school does factor the weighted GPA into their decision to choose the valedictorian, then you should take the most rigorous courses whenever possible. If you think that the harder classes may be too tough for you, then you may need to rethink being valedictorian. To be the valedictorian, you have to get As in the hardest classes at your school pretty much every time. Are you up for the challenge?
    Become Valedictorian Step 3 Version 2.jpg
    • Take AP classes over honors classes when you can, if they are worth more points.
    • Your electives can really hurt your weighted GPA because they tend to be considered regular classes. However, all students in your school will most likely be expected to take some electives, such as gym or art class. Whenever you can, though, try to take an elective that is worth more points, if you have the option. For example, don't take Creative Writing if it is considered a regular class; take AP Language and Composition if it is offered to everyone instead.
    • Sure, you may end up missing out on some fun classes over the course of your high school career. But those classes will NOT get you to be the valedictorian.
    • If your school has the option of not having to take gym if you do a sport, then consider picking up a sport if not taking gym will boost your GPA. If you want to be valedictorian, then you should also be well-rounded so you stand out in college applications for more than just your grades. You should obviously not take a sport, though, just to make your GPA higher, because the extra time you devote to sports may keep you away from your studies.
  4. Remember that being the valedictorian will NOT guarantee you a spot to any elite college. If you want to be valedictorian, then you must be very ambitious, having your sights on elite schools such as Harvard, Yale, Duke, or Amherst. But remember that when you apply to colleges such as these, valedictorians will be a dime a dozen. Being valedictorian will keep you in the running and will impress admissions officers, but you want to avoid looking like a cold grade-obsessed automaton and show that you have depth, several other interests, and that you're a good citizen of your community.
    Become Valedictorian Step 4 Version 2.jpg
    • Even William R. Fitzsimmons, the dean of admissions at Harvard, recently said, “I think, it’s a bit of an anachronism. This has been a long tradition, but in the world of college admissions, it makes no real difference.”[3]
    • Being valedictorian in addition to showing strengths in sports, community service, or the arts will help you be an amazing candidate. But being ranked #10 in your class and doing these same things won't make you look much worse.
    • Your SAT score will also have a major impact on your college acceptances. Many colleges place equal weight on your GPA and your SAT score -- that means your effort for four years of high school courses will amount to about as much as your efforts on a 3.5 hour exam! Sound fair? It isn't, but you've got to get used to it.

[Edit]Working Hard

  1. Study smart. If you want to be a valedictorian, then you have to study smart to get good grades. This doesn't mean that you should spend all of your waking hours perched over your book, but it does mean that you should study as efficiently and thoroughly as possible. Here are some tips to get you studying hard:
    Become Valedictorian Step 5 Version 2.jpg
    • Make an efficient study schedule. Maybe you will spend 2-3 hours of studying a night, or maybe you will study for 3-4 hours every other night. Whatever you do, make a plan in advance so you don't end up getting overwhelmed or procrastinate.
    • Pace yourself. Set a goal -- 10-15 pages per day, and don't go overboard too much or you'll burn out.
    • Take advantage of practice quizzes. Your history books, math textbooks, or other course material may come with practice questions that you can use to see how well you know the course materials. Even if your teacher doesn't use these resources, they can be valuable to you.
    • Make flashcards. If flashcards help you memorize historical concepts, foreign languages, or even mathematical operations, use them.
  2. Stand out in the classroom. You don't have to be the teacher's pet to be stellar in the classroom. You should, however, arrive to class on time, participate in class discussion, and ask questions when you're confused about something. Being focused in the classroom will help you absorb the course information more, which will lead you to do better on tests, and it will also make your teacher like you more and will help you earn any in-class points allotted for the course, such as participation points.
    Become Valedictorian Step 6 Version 2.jpg
    • Keep your chatter with other students to a minimum. You may be missing some important information.
    • Take stellar notes to study from. Don't just write down what the teacher is saying word for word -- try to put the notes in your own words so you really absorb the material.
    • Talk to your teacher after class occasionally. You don't have to annoy your teacher by always being there, but getting to know your teachers a bit more will help you stand out in their eyes.
  3. Get organized. If you want to succeed in the classroom and throughout your studies, then you have to be organized. You need to have a notebook for every class, clearly labeled binders, a clean locker, and an organized desk at home. If your life is filled with clutter, then you won't be able to retain information as easily and you won't have as much to focus on your coursework as you'd want.
    Become Valedictorian Step 7 Version 2.jpg
    • Keep a planner where you write down all of the homework due each day.
    • Keep a calendar over your desk where you can mark important test dates.
  4. Read ahead. Reading ahead to the material that your teacher will cover the next day or next week will give you a leg up on the course content and will keep you from getting confused or not absorbing as much information as you could. As long as you're not covering anything too difficult that would be easier to comprehend if it were first explained by your teacher, you'll be giving yourself a leg up by doing this.
    Become Valedictorian Step 8 Version 2.jpg
    • Reading ahead is a great way to give yourself an edge. Just don't bring it up when you participate in class or the teacher may get annoyed that you're stealing her thunder or confusing other students with additional information.
  5. Get extra help. You may be thinking, "If I'm trying to be the valedictorian, then why would I need extra help?" This is where you're precisely wrong. If you want to be the valedictorian, then you have to get an edge over the competition. Get more information or more repetition of the subject matter, whether you ask your teacher for extra help after class, ask your parents for more help if they understand your homework better than you do, or even ask an older successful student for some assistance.
    Become Valedictorian Step 9 Version 2.jpg
    • You can also invest in a private tutor, but those can get pretty pricey.

[Edit]Staying Centered

  1. Participate in extracurricular activities. Always leave time for clubs, sports, volunteering, or other activities outside of class. Believe it or not, extracurricular commitments can boost your grades because they can help you organize your time better. Studies even show that student-athletes tend to do better in school than non-athletes.
    Become Valedictorian Step 10.jpg
    • This will also help you stay grounded and will keep you from obsessing over your studies too much.
  2. Maintain your social life. You don't want to be holed up in your room, studying for ten hours under the glare of a too-bright light bulb. You want to have time to study, sure, but you also want to make time to pursue your friendships, go to parties, hang out at the movies, or even go to the school carnival. If you spend 100% of your time with your nose buried in a book, you may start to feel a little bit unhinged and lonely. You don't have to be the life of the party, but having at least a few meaningful friendships will make you feel more motivated to study. Be sure that you stay away from most of the drama at your school, for it can be very time consuming.[4]
    Become Valedictorian Step 11.jpg
    • Find some friends that you can study with. Having a group of like-minded students can help you make studying more fun and productive. Try starting a study group for one of your classes and see how it works out; if you're able to stay focused, then you've just improved your chances of acing your classes.
  3. Be aware of your competition, but don't obsess about rivals. You don't want to waste time on narcissism and nervous back-stabbing. Don't go around asking your rivals what they got on their tests, how much time they spent studying for the latest exam, or what grade they think they're going to get in a class. This will make you focus your efforts in the wrong places and will keep you focused on what you have to do.
    Become Friends With a Guy Step 5.jpg
    • Remember that everyone is different. Maybe you need to study for 4 hours to ace an exam and the student next to you only needs to study for 3 hours to do well. You don't have to be the most naturally gifted to be the valedictorian -- you just have to work the hardest.
  4. Treat your body with care. Becoming valedictorian isn't a test of raw intellect, it's a test of endurance. Be healthy. Eat breakfast, and stay away from drugs and alcohol. Only when your body is strong can you perform at the highest level. Though you can splurge on pizza and candy once in a while, eating power foods like nuts, vegetables, and proteins will keep you focused on your work and will keep you from crashing or losing steam.
    Become Valedictorian Step 13.jpg
    • You can still have a social life while avoiding drugs or alcohol. If you want to be valedictorian, then you have to stick with the right crowd.
  5. Get plenty of rest. Getting 7-8 hours of sleep a night and going to bed around the same time and waking up around the same time will keep your body feeling energetic and strong, and will give you the fuel you need to pay attention in class, succeed in your exams, and to be a stellar student. Make sure you give yourself plenty of time to study so you don't end up going to bed at three in the morning and sleeping through your classes.
    Become Valedictorian Step 14.jpg
    • Try to go to bed no later than 10 or 11 PM and give yourself at least 45 minutes to an hour before you leave the house in the morning so you feel alert when you head to class.
  6. Don't put too much pressure on yourself. If you want to be the valedictorian, then you have to relax a little bit. Don't tell yourself that every little grade matters and will influence your fate and your chances of going to a good college. Sure, grades are important, but so is being mentally sound and having great friendships. Remind yourself that it's not the end of the world if you don't get a perfect test grade -- you'll get 'em next time.
    Become Valedictorian Step 15.jpg
    • To be the valedictorian, you'll have to be in a calm state of mind or you may find that the pressure is suddenly too much to deal with.
    • Stay positive and always look forward -- doesn't waste your time stressing about your test grade from a month or a year ago. It just isn't worth it.

[Edit]Tips

  • If you want to become a valedictorian, make sure you're not distracted and never give others the chance to excel over you when they shouldn't.
  • Stay focused. If you really want to be valedictorian, then you have to fight for it.
  • Becoming valedictorian is only half the battle. It only gets you half of the way. You also have to Write a Valedictorian Speech.
  • Take as many Honors and AP classes as you can. If your school goes by weighted GPA, they give you more points than regular classes, allowing you to get over a 4.0 GPA.
  • Stay away from drugs, alcohol, or bad influences. They will not help you become valedictorian and will have negative long term effects.
  • Join as many groups and clubs at your school as you can, such as CSF and National Honor Society.
  • If your school has the international baccalaureate program, it is advisable to join it because it gives you more rigorous courses to choose from.
  • Don't spend a lot of time sitting in front of a TV or computer. It's not moving you forward at all. Spend your time and money on books and/or experiences instead.

[Edit]Warnings

  • Becoming valedictorian is not a significant advantage that guarantees acceptance into any Ivy League school. Valedictorians get rejected all the time, often for those in second or third place. Do sports or other extracurricular activities too, unless they become too time-consuming.
  • Remember: there's more to life than class rank! If you don't get valedictorian, who will care ten years from now? Most likely nobody! What will matter are the friends you kept and the passions you discovered. Make sure to have fun, just stay out of trouble!

[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/UVDtEqI
via Peter
$3 Per Year Web Hosting