$3 Per Year Web Hosting

Tuesday, 2 February 2021

How to Paint Bed Sheets

Painting bed sheets is great for making backdrops, creating large banners, or just adding designs to make them unique. If you want to try customizing your sheets, you can easily apply textile paints to personalize them. Lay the sheets in your work area so you have a flat painting surface and set up your supplies. When you apply the paint, you can use many methods to achieve different effects on the sheets. Once you finish painting them, make sure to let them dry before you set the paint so the colors don’t fade.

[Edit]Steps

[Edit]Prepping the Sheets and Workspace

  1. Wash and dry the sheets before painting them to prevent shrinkage. Put the sheets in a washing machine and set it on the cycle with the warmest water. Add detergent as you normally would and let the wash cycle run. After that, put your sheets in the drier and run it on the hottest setting. Allow the sheets to dry completely before painting on them.[1]
    Paint Bed Sheets Step 1.jpg
    • You can paint on any sheets or comforters that you want, but the paint will adhere better to higher thread counts since there’s more fabric.
    • Running the sheets through the hottest cycles will pre-shrink them before you paint so your designs don’t get distorted if you wash them later on.
  2. Lay the sheet flat in your work area so it doesn’t have any wrinkles. Find a workspace that’s large enough where you can spread out the sheet so it stays flat. Put your hand in the middle of the sheet and smooth it out toward the edges to get rid of any wrinkles on the surface. Keep the sheet stretched tight while you’re painting, or else ut could distort your painted designs.[2]

    • If the sheet still has wrinkles, iron them out before you paint.
    • If you don’t have room to spread out the entire sheet, you can fold up the areas of the sheet where you aren’t applying paint to save space.
  3. Secure a piece of cardboard behind the section you’re painting with clothespins. Use a flat piece of cardboard that’s larger than the area you’re painting and slide it underneath the sheet. Pull the sheet tight to the edges of the cardboard and clip clothespins every around the cardboard so it doesn’t slide around. Make sure there aren’t any wrinkles on the sheet, or else the design will look distorted.[3]

    • The cardboard provides a flat painting surface and prevents the paint from bleeding through the sheet.
  4. Put the textile paint you want to use on a palette. Textile paints are acrylics that specially formulated to stay flexible when they dry so the sheets don’t get stiff. Place coin-sized amounts of the colors you want to use on an artist’s palette so there’s about of space between them. Keep the colors separated so you don’t accidentally mix the shades together.[4]

    • You can buy textile paints and a palette from your local craft store.
    • If you want to make the colors on your palette lighter, mix them with white paint until you’re happy with the tint. If you want to make your colors darker, combine them with black paint instead.
  5. Fill a bowl or glass with clean water so you can rinse your brushes. Make sure the bowl or glass you use is clean before filling it up. Use cold water from your sink and set the container within reach of your work surface. That way, you can easily rinse your brushes when you switch paint colors.
    Paint Bed Sheets Step 5.jpg
    • Keep a few paper towels near the water so you can dry your brushes afterward.

[Edit]Applying the Paint

  1. Use flat- and pointed-tip brushes to paint freehand designs on sheets. If you want to make thick lines or apply broad strokes, opt for brushes that have flat tips. For more detailed lines, choose thin pointed-tip brushes. Dip the bristles of your paintbrush so there’s an even coat of paint on the tip. Hold the brush like a pencil and set the bristles on the sheets. Slowly pull the brush in the direction you want to apply a thin layer of paint.[5]

    • The size of the brush you use depends on how large you want the brushstrokes. Get a brush set from a craft store that has multiple sizes so you can experiment with them.
    • Outline your design with a pencil or chalk before you paint if you want to have a guide to follow.
    • Textile paints are permanent as soon as you apply them to fabric, so be careful not to get any in places where you don’t want paint.
    • Try painting flowers or trees if you want to make a natural feeling backdrop.
  2. Apply paint with a sponge brush if you want to stencil the bed sheets. Lay your stencil flat on the sheet and secure it in place with masking tape. Dip the end of a sponge brush in the color you want to use until there’s a thin, even layer of paint on it. Starting from the outer edges of the design, hold the sponge brush vertically and dab it straight up and down on the stencil. Work toward the center of the stencil to evenly apply the paint on the sheets. Once you’ve filled the stencil in, take it off the sheet immediately to prevent color-bleed.[6]

    • You can buy stencils from your local craft store or make your own.
    • Don’t apply the paint in thick layers since it will take longer to dry and the edges may look messy.
    • Painting with a stencil works great if you want to make bed sheet sets with matching designs.
    • Try stenciling letters if you’re making a banner or a backdrop so all of the writing is legible.
  3. Cover large areas with paint using a rubber brayer. A brayer looks similar to a paint roller, except it’s made of hard rubber rather than fabric. Roll the brayer in the paint you want to apply until it has a thin, tacky layer on the rubber. Start at the top of the sheet and roll the brayer in long strokes across the sheet. Overlap each stroke by so you can cover the sheet completely. Reapply paint as it starts to get thin on the brayer so you don’t leave any spotty areas.

    • You can buy a rubber brayer from a craft store or online.
    • Using a brayer works great if you want to create colored backdrops from your sheets.
    • Try adding horizontal stripes of color going from a dark black shade to a yellow or orange if you want to paint a sunrise or sunset.
  4. Try fabric spray paint to get light, even coverage on the sheets. Look for a set of fabric spray paint at your local craft store or online. Hold the spray paint container about above the sheet and press down on the button to spray it. Use short bursts of paint as opposed to holding the button down so you can get more even coverage. If you want the paint to be more concentrated, move the spray paint closer to the sheet.[7]

    • Avoid using regular spray paint since it can cause the sheet to stiffen after it dries.
    • Fabric spray paint works great for filling in stencils or making ombre patterns for backdrops.
  5. Wet the fabric with a spray bottle to give the paints a watercolor effect. Mist the sheet with clean water until it’s slightly damp to the touch. Dip your paintbrush in the paint and spread it over the wet section of the sheet. The paint will look more transparent and move around on the fabric surface easier to create a painterly look for your design.[8]

    • Sprinkle salt on the paint while it’s still wet to add interesting textures to your design. The salt will absorb some of the water and leave cloudy patterns of paint.
    • Try making clouds on a blue backdrop if you want something that feels relaxing.
    • Use a variety of colors and paint them in random sizes and shapes to make an abstract design.
  6. Create a splatter effect by flicking the paint off of a toothbrush. Get a toothbrush with stiff bristles and dip them in the paint color you want to apply. Hold the toothbrush so the bristles face the sheet and flick your wrist forward to splatter the paint. Keep the toothbrush close to the sheet if you want a tight splatter pattern, or keep it further away for a wider pattern. Rinse the toothbrush off whenever you change colors.[9]

    • Don’t use the toothbrush for anything other than painting.
    • This works well if you want to add random designs or accents to your bedsheet.
  7. Soak the sheet in a bucket with water and paint if you want a wrinkled pattern. Choose a bucket that’s large enough to hold the entire bed sheet and fill it with water. Put a coin-sized amount of fabric paint in the bucket and stir it to combine it with the water. Bundle up the sheet and completely submerge it in the water for 2–3 hours. Take the sheet out of the water and wring it out so it can dry. After about 1 week, unfold the sheets to see the pattern left by the paint.
    Paint Bed Sheets Step 12.jpg
    • This method works well if you want to make an interesting pattern for a backdrop.
    • While the sheet soaks in the water, paint will gather in the wrinkles and make them darker.

[Edit]Caring for Your Sheets

  1. Allow the paint to dry for 24 hours. Leave the sheet undisturbed when you’re finished painting so it has time to dry on the fabric. Keep the painted section of the sheet flat so the colors don’t run or drip. After 24 hours, lightly tap the paint with your finger to check that it’s dry to the touch. If not, leave the paint to dry for another hour before checking again.[10]
    Paint Bed Sheets Step 13.jpg
    • Check the drying times listed on the paints you used since they may vary.
  2. Hold an iron over the paint to heat-set it. Heat-setting prevents the textile paints from running or fading when you wash your sheets. Turn an iron on to medium or high heat and keep it at least over the painted surface. Move the iron over all of the painted surfaces for about 3–5 minutes so the paints bond to the fabric.[11]

    • You don’t have to heat-set pure acrylic paints if you used them. However, if you mixed textile medium with the acrylics, you still need to.
  3. Wash your sheets on a gentle cycle to help preserve the color. Select the gentlest cycle on your washing machine and use detergent and fabric softener as normal. After the wash, choose a low heat setting on your drier and use the setting labeled “Delicates” or “Gentle” to keep the colors intact.[12]
    Paint Bed Sheets Step 15.jpg
    • If possible, hand-wash the sheets and hang them on a clothesline to dry. That way you don’t risk ruining them in your machine.
  4. Keep the sheets out of direct sunlight to prevent fading. Long exposure to sunlight and UV rays can break down the pigments in the paints, so the colors may fade. Place your sheets away from a window or out of lights so the designs last longer. If you want to use the sheets outside, like if you were using it as a banner, keep it folded up as often as possible so the sun doesn’t damage the paints.[13]
    Paint Bed Sheets Step 16.jpg
    • If the colors on your sheets fade, you can always paint over them again.

[Edit]Tips

  • Wear clothes that you don’t mind getting dirty just in case you get paint on them.

[Edit]Warnings

  • Textile paint is permanent once it’s applied, so try not to get it on anything else.
  • Don’t use oil paints when you paint your bed sheets since they won’t dry as well.

[Edit]Things You’ll Need

  • Bed sheets
  • Cardboard
  • Clothespins
  • Fabric paints
  • Palette
  • Bowls
  • Flat-tip paintbrushes
  • Pointed-tip paintbrushes
  • Sponge brushes
  • Rubber brayer
  • Spray bottle
  • Toothbrush
  • Bucket
  • Iron

[Edit]References



from How to of the Day https://ift.tt/3pKARdd
via Peter

How to Do Lateral Bounds

Would you like a simple workout that trains your calves, quads, hamstrings, core, glutes, and cardio all at the same time? Then the lateral bound is perfect for you! This plyometric workout is great for building endurance and explosive muscle energy in your lower body. Even better, it’s very easy to learn and there are tons of variations if you want to get a more intense workout.

[Edit]Steps

[Edit]Basic Exercise

  1. Stand in a half-squat with your feet about shoulder-width apart. Hold your arms out straight in front of your chest. Bend your knees slightly and shift your weight to the balls of your feet.[1]
    Do Lateral Bounds Step 1.jpg
    • To make jumping a little easier, try starting with your right foot lifted off the ground and all of your weight on your left foot.
    • Keep your core tight by clenching your abs throughout the whole motion. This helps support your body.
    • You can start on your right foot instead and reverse these directions. It doesn’t matter which side you start on.
  2. Push off your left foot to hop to the right. Quickly shift all of your weight onto your left foot and lift your right foot. Then, push off the ground hard with your left foot to hop sideways.[2]

    • Take a small jump if you’re just getting started. As you get better, push harder and jump further.
    • Some variations say to keep your hands in front of your chest during the bound. Others say to pump your arms with each bound, which gives you a more intense workout.
  3. Land with all of your weight on your right foot and keep your left foot lifted. Come down on the ball of your right foot to maintain your balance as you land. Bend your knee to absorb the impact and prepare to hop back. Keep your left foot lifted slightly off the ground so all of your weight is on your right foot.[3]

    • Left foot positioning varies. Some say to keep the left foot near the right knee, and others prefer to sweep it back behind their left leg. Do what you're most comfortable with!
    • If you’re having trouble keeping your balance, take a smaller hop.
  4. Pause for a moment and push off your right foot to jump left. Hold your position for a second, then spring off your right foot to the side again, jumping back to the left.[4]

    • Don’t worry if you lose your balance. Just reset yourself and keep going.
  5. Land on your left foot to complete a rep. Try to land on the ball of your left foot, keeping your right foot off the ground. This completes 1 repetition of a lateral bound.[5]

  6. Repeat this movement 10 times for a full set. Continue bounding from side to side to train your legs, hips, and core muscles as well as get your heart rate up. After a few reps, you’ll start feeling the burn![6]

    • Try doing 2 sets of 10 reps to start. You can add more reps later as you get better at the exercise.[7]
    • Time the exercise instead of counting reps for a great workout. Set a 1-minute timer and bound side to side as many times as you can until the timer goes off.
    • As an alternative, simply bound back and forth until you can't do anymore reps. This is a more intense workout.

[Edit]Variations

  1. Take longer jumps to make the workout harder. Once you get the basic motion for lateral bounds down, it’s simple to give yourself a better workout. Just try to take longer bounds from side to side. This strengthens your legs muscles more and also boosts your cardio and endurance training.[8]

    • Remember to stay in the right form while you’re taking longer jumps. Don’t sacrifice form for more distance.
    • If you’re trying to jump further, pumping your arms from side to side instead of keeping them in front of your chest will help you gain more distance.
  2. Hold a medicine ball to increase the resistance. You can easily add weight to the lateral bound with a medicine ball. Hold the ball with both hands on the side that you’re hopping off from. When you hop, swing the ball across your body in the direction you’re hopping. Continue swinging back and forth during the workout.[9]
    Do Lateral Bounds Step 8.jpg
    • Be sure to keep your core tight if you’re using a medicine ball. It’s easier to hurt your back if you’re holding weight.
    • You could also just hold the medicine ball in front of your chest instead of swinging it. This still adds resistance and it's a bit easier.
  3. Squat down when you land on your opposite foot for a leg workout. This gives your legs and glutes more of a burn. When you land on your opposite foot after a bound, bring your feet together. Then squat down until your thighs are almost parallel with the floor. Raise back up and bound to the other side. Repeat this squat for every bound.[10]

    • When you’re just starting out with this variation, plant both feet on the ground. When your legs get stronger, keep the leg you hopped off in the air to focus all the weight on one foot.
    • Remember to keep your core tight. You can hurt your back if you don’t stay straight while doing a squat.
  4. Jump at 45-degree angles to advance forward with every bound. Instead of jumping directly side to side, hop at about a 45-degree angle with each bound. That way, you’ll gradually move forward for a more dynamic exercise.[11]

    • A long hallway is a good place for this exercise so you have plenty of room to move forward.
    • You also don’t need a lot of room to do this exercise. You can bound forward a few times, then turn around and go back.
  5. Add a small bounce to every bound for more cardio training. Each time you land after a bound, do a tiny bounce with that same foot. Don’t switch sides, just hop up slightly. This adds more cardio to the lateral bound.[12]

    • You can do this whether you’re staying in place or advancing forward when you bound. It’ll make the workout more intense in either case.


[Edit]Tips

  • If you have trouble with balance, try practicing by standing on one foot for a few minutes at a time. This might make the exercise easier.

[Edit]Warnings

  • This might be painful if you have knee trouble, so don’t do this exercise if it hurts your knees.

[Edit]References



from How to of the Day https://ift.tt/2O1rTKP
via Peter

How to Connect PayPal to Squarespace

This wikiHow will show you how to manually connect PayPal to Squarespace if your PayPal Business account is set up in Australia, Brazil, India, Israel, or Japan. If you're not located in these locations, you can simply log into your Squarespace website, click Commerce > Payments and select Connect PayPal.[1]

[Edit]Steps

[Edit]Giving Squarespace API Permissions

  1. Go to http://www.paypal.com/ and log into your business account. You'll need to log into your PayPal Business account. If you have a personal account, you can upgrade it for free.
    Connect PayPal to Squarespace Step 1.jpg
  2. Hover over your name and click . You'll see your profile name in the top right corner of the page. If you're signed into a personal account, you'll see a gear icon instead.
    Connect PayPal to Squarespace Step 2.jpg
  3. Click next to "API access." It's in the "Account access" tab, which should be active by default when you click Account Settings.
    Connect PayPal to Squarespace Step 3.jpg
  4. Click . This is under "Pre-built payment solution" near the center of the page and will allow 3rd-party platforms, like Squarespace, to access PayPal.
    Connect PayPal to Squarespace Step 4.jpg
  5. Enter "paypal-payments_api1.squarespace.com" next to "Third Party Permission Username" and click . This will give you the permissions needed for Squarespace to connect to your PayPal account.
    Connect PayPal to Squarespace Step 5.jpg
  6. Click to select all the boxes and click . After this step is done, you'll have successfully granted API permissions from PayPal to Squarespace.
    Connect PayPal to Squarespace Step 6.jpg

[Edit]Copying Your PayPal Merchant ID

  1. Go to http://www.paypal.com/ and log into your business account. You'll need to log into your PayPal Business account. If you have a personal account, you can upgrade it for free.
    Connect PayPal to Squarespace Step 7.jpg
  2. Hover over your name and click . You'll see your profile name in the top right corner of the page. If you're signed into a personal account, you'll see a gear icon instead.
    Connect PayPal to Squarespace Step 8.jpg
  3. Click . It's in the vertical menu on the left side of the screen under the header, "Business Profile."
    Connect PayPal to Squarespace Step 9.jpg
  4. Copy the information next to "PayPal Merchant ID." To copy this information easily, select the text and press Ctrl + C (Windows) or Cmd + C (Mac). You'll be pasting this information later.
    Connect PayPal to Squarespace Step 10.jpg

[Edit]Connecting to PayPal

  1. Log into your Squarespace site. You'll need the PayPal Merchant ID you copied earlier.
    Connect PayPal to Squarespace Step 11.jpg
  2. Click . It's in the "Home Menu" on the left side of the page.
    Connect PayPal to Squarespace Step 12.jpg
  3. Click . The list of payments for your website will display.
    Connect PayPal to Squarespace Step 13.jpg
  4. Click and enter your PayPal login information. Once you've entered your login information, you will see a text field for your merchant ID.
    Connect PayPal to Squarespace Step 14 Version 2.jpg
  5. Paste the PayPal Merchant ID. To paste, click your cursor in the text field and press Ctrl + V (Windows) or Cmd + V (Mac).
    Connect PayPal to Squarespace Step 15.jpg
  6. Click . Customers will now be able to pay with PayPal on your site.[2]
    Connect PayPal to Squarespace Step 16 Version 2.jpg

[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/3rcY2xd
via Peter

Monday, 1 February 2021

How to Extend a Candle Wick

We've all been there—you go to light your favorite candle, only to find that the wick is covered in wax. But don't throw out that candle just yet! If you can still see the wick but it's too short to light, try adding a makeshift paper or wooden wick to burn off some of the wax. If the wick is completely covered with wax, replace the wick to save your candle!

[Edit]Steps

[Edit]Adding to a Short Wick

  1. Dig out the wick if it's covered in a little wax. If the wick is buried just under the surface of the wax, use a spoon or a butter knife to carefully scrape away the wax until the wick is exposed. You could also use a lighter or a hair dryer to melt the wax—just pour the excess wax into a separate heat-safe container.[1]

    • The new wick needs to sit right beside the old one, which is why it's important to dig the existing wick out from underneath the wax.
    • Don't just try to dig a deep enough hole to burn the wick—the candle will just burn down in a tunnel, and the wax will eventually drown the wick again.[2]
  2. Melt some candle wax in a wax warmer or double boiler. The easiest way to melt wax is to put it in a wax warmer, but if you don't have one, set up a double-boiler—fill one pot with water and put it on to boil, then sit a metal bowl or another pot inside the first one so it's just touching the boiling water. Place the wax inside the second bowl and stir it frequently until it melts.[3]

    • Use the wax you scraped or melted out of your candle, or scrape some wax out of another old candle if you have one on hand.
    • No matter which type of wick you're making, it's best to dip it in wax first. This will help it burn more slowly and evenly.
  3. Make a paper wick if you just need a little extra length. For a quick way to fix a short wick, take a scrap of paper and roll it up tightly. Choose a thicker paper, like notebook or copy paper, since it will burn more slowly.[4]

    • You can even use toilet paper or a paper towel if that's all you have on hand.[5] However, avoid using colored paper or a page from a magazine—the fumes from the ink can be toxic.[6]
    • You'll only need the wick to be about , but it's okay to roll it longer if it's easier. You can trim it down later.
  4. Opt for a wooden wick if the old wick is very short. If your wick is just barely sticking up, you'll need a sturdier wooden wick so you can push it deeper down into the wax. Use a toothpick, matchstick, wooden skewer—whatever thin piece of wood you have on hand.
    Extend a Candle Wick Step 4.jpg
    • You can also cut a popsicle stick lengthwise into halves or thirds to use as a wick, if you'd like.
  5. Use tweezers to dip the wick into the melted wax. Carefully lower your paper or wooden wick into the bowl with your melted wax. Use the tweezers to turn the wick back and forth, ensuring it's completely coated.[7]

    • If you're using a paper wick, keep a grip on it with the tweezers so it doesn't come unrolled.
    • Once the wick is coated in the wax, remove it and let it cool for about 5 minutes or until the wax hardens.
  6. Use a lighter or hair dryer to soften the surface of the candle. You don't have to melt the wax all the way. Just heat it up a little so the wax starts to soften.[8]

    • This will make it easier to push the wick into the candle.
  7. Press the wick into the candle wax. If you're using a paper wick, wrap it around the existing wick, then gently press just the very bottom into the softened wax. If you have a wooden wick, place it beside the old wick and push it deep down into the candle.[9]

    • If you need help pushing the wooden wick into the candle, try tapping it lightly with a mallet or hammer.
    • Use sharp shears to trim the wick so it's only about long.[10]
  8. Light the wick, then pour off the wax once it melts. Try to let your new wick burn long enough for the wax to melt all the way across the surface of the candle. Then, pour the melted wax into the same container you used to melt your wax earlier. Keep doing that until the old wick is long enough to use again![11]

    Extend a Candle Wick Step 8.jpg
    • Using the same wax container will make cleanup easier! Just let the wax cool until it hardens, then scrape it out of the bowl or pot. If you'd like, save the wax to use in a wax warmer or another project—or simply toss it in the trash if you don't think you'll use it again.

[Edit]Replacing a Lost Wick

  1. Melt a little wax in a double boiler. If you have a dedicated double boiler, use that. If you don't, it's easy to make your own! You'll either need 2 pots or a pot and a metal bowl—either way, the second pot or bowl should rest on the sides of the first pot without touching the bottom. Fill the bottom pot with water and bring it to a boil, then place the wax in the second pot or bowl and stir it frequently until it melts.[12]

    • Make sure the pot or bowl doesn't touch the bottom of the first pot. If it does, the wax will scorch!
    • Scrape some of the wax out of the candle you're replacing, use another old candle, or melt a small tealight or taper candle. You don't need much—just enough to coat the wick.
  2. Dip 100% cotton cord into the melted wax. Cut a length of cord that's at least longer than the height of your candle jar. Use tweezers or tongs to carefully place the cord into the wax. Hold it there for about 30 seconds, stirring it around with the tweezers to ensure it's completely saturated with the wax.[13]

    • Cord is typically thicker than string, so it will burn more slowly. Butcher's twine is a good option for this—it's about 2mm in diameter and is already braided.[14]
    • If all you have is string, try braiding 3 strands together to create a thicker cord.[15]
    • The wax will help the cord burn slowly and evenly.
  3. Allow the cord to dry completely. Remove the cord from the wax and stretch it out so it's completely straight. Let it sit for about 5-10 minutes, or until the wax is dry and the cord feels stiff.[16]
    Extend a Candle Wick Step 11.jpg
    • If you need to, cut the cord into shorter lengths once it's dry.[17]
  4. Place the candle inside your double boiler to melt the wax. Carefully lower the candle jar into your double-boiler. Let it sit there for about 10-15 minutes, or until the wax starts to soften.

    • You can also use your oven to melt the wax, if you prefer. Place your candle upside-down on a baking sheet lined with parchment paper, then put it in an oven that's been heated to for about 15 minutes.
  5. Remove the wax from the candle and place it in the double boiler. Once the wax is soft enough, use a butter knife to scoop it out of the jar. Then, place the wax inside the bowl or pot you were using until it melts completely.[18]

    • If you melted the wax in the oven, carefully pour it from the sheet pan into the double-boiler to keep it warm until you're ready to use it again.
  6. Thread the new wick through the metal-bottom. Use tweezers to carefully grab the old wick and metal-bottom (the metal piece that holds the wick in place) from the melted wax. Then, squeeze the top of the metal piece with needle-nose pliers to open it. Pull out the old wick and discard it, then thread the new wick through the same hole and pinch it closed again with the pliers.[19]

    • If you don't want to reuse the metal-bottom, use hot glue to attach your new wick to the bottom of your candle container.
  7. Use a stick to center the new wick in the candle. Wrap the loose end of the wick around a pencil or popsicle stick, then drop the other end into the bottom of the candle container. Make sure the metal-bottom is laying flat on the bottom of the candle jar. Rest the pencil or stick across the mouth of the container—this will ensure the wick stays centered as the candle hardens.[20]

  8. Pour the melted wax back into the candle jar. Grab a couple of pot holders, then carefully pour the melted wax back into its original container. Be sure not to bump the wick as you do this—you want it to stay perfectly in the middle of the jar![21]

    Extend a Candle Wick Step 16.jpg
    • Be very careful so you don't burn yourself on the hot bowl or wax.
  9. Let the wax cool until it's completely hardened. For the best results, give your candle at least 3 days to cure before you light it again. However, some candle experts recommend letting the candle cure for at least 1-2 weeks.[22]
    Extend a Candle Wick Step 17.jpg
    • Once the candle has fully cured, trim the wick to before you light it.[23]

[Edit]Things You'll Need

[Edit]Adding to a Short Wick

  • Tweezers
  • Wax warmer or double boiler
  • Paper or wood for your wick
  • Lighter
  • Spoon, knife, lighter, or hair dryer (optional)
  • Hammer or shears (optional)

[Edit]Replacing a Lost Wick

  • Wax warmer or double boiler
  • 100% cotton cord or string
  • Tweezers
  • Needle-nose pliers
  • Scissors
  • Pot holders
  • Baking sheet (optional)
  • Parchment paper (optional)

[Edit]Tips

  • If you want to re-jar your candle but you don't want to make your own wick, buy a pre-made wick at a big-box or craft store. If you do that, just skip to melting your candle wax.

[Edit]References

  1. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  2. ↑ https://www.candlejunkies.com/guide-to-preventing-and-fixing-candle-tunneling/
  3. ↑ https://food52.com/blog/14170-how-to-make-soy-candles-from-any-containers-you-have-on-hand
  4. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  5. ↑ https://www.bobvila.com/articles/how-to-make-a-butter-candle/
  6. ↑ https://www.bobvila.com/slideshow/10-things-never-to-burn-in-the-fireplace-51849
  7. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  8. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  9. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  10. ↑ https://www.insider.com/why-you-should-always-trim-candle-wicks-2016-11
  11. ↑ https://www.candlejunkies.com/guide-to-preventing-and-fixing-candle-tunneling/
  12. ↑ https://youtu.be/jbT6llFACik?t=65
  13. ↑ https://blaizencandles.com/how-to-chose-a-wick-and-make-your-own-wicks/
  14. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  15. ↑ http://www.sewhistorically.com/how-to-make-diy-candle-wicks-with-cotton-string/
  16. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  17. ↑ https://youtu.be/jbT6llFACik?t=138
  18. ↑ https://www.architecturaldigest.com/story/how-to-get-wax-out-of-a-candle-jar
  19. ↑ https://blaizencandles.com/how-to-chose-a-wick-and-make-your-own-wicks/
  20. ↑ https://nestingwithgrace.com/easiest-way-to-make-candles-non-toxic/
  21. ↑ https://blaizencandles.com/how-to-fix-a-wick-lost-in-wax/
  22. ↑ https://support.candlescience.com/hc/en-us/articles/201352274-How-do-I-get-the-fragrance-to-smell-stronger-
  23. ↑ https://www.insider.com/why-you-should-always-trim-candle-wicks-2016-11


from How to of the Day https://ift.tt/3pGUGlE
via Peter

How to Stop a Shoe Tongue from Sliding to the Side

It’s pretty annoying when you’re out and about and the tongue of your shoe keeps sliding to the side. You pull it back to its original position and then 5 minutes later it’s back on its side again! Luckily, this problem is easily solved if your shoes have a tongue loop, which is a small strip of fabric in the middle of your tongue. Since most sneakers, boots, and casual footwear have these, you should be good to go after you spend a few minutes re-lacing your shoes. If you don’t, there are a few other hacks you can use to keep that tongue right where it belongs.

[Edit]Steps

[Edit]Tongue Loop

  1. Check your tongue to see if there’s a small fabric loop in the middle. Most sneakers, boots, and casual footwear have a tongue loop. Grab one of your shoes and loosen the laces up so you can see every portion of the tongue. Look for a fabric loop somewhere in the middle of the tongue. If you have one, you can use this to hold your tongue up and keep it from sliding around.[1]
    Stop a Shoe Tongue from Sliding to the Side Step 1.jpg
    • It’s extremely uncommon these days, but some shoes have a set of vertical slits that are cut into the tongue instead of fabric loop. You can use these slits the same way as a tongue loop if you have them.
    • This works with basically any lace pattern so long as the laces cross over one another at an angle. Out of all of the popular ways to lace shoes, the only shoelace pattern that you can’t do this with are the parallel bars.
  2. Unlace your shoes down to the row of eyelets just below the loop. Starting at the top of each shoe, undo the laces by pulling them out through the eyelets, which are the parallel sets of holes that hold your shoelaces in place. Remove the laces from each row until you get to the set of eyelets that are just below the tongue loop.[2]

    • Make sure each side of your laces is roughly equal in length before proceeding. Sometimes, uneven laces lead to uneven pressure on the tongue, which can cause the tongue to slide to one side or another. If your laces are uneven, unlace your shoes all the way and relace them.
  3. Thread your shoelaces through the tongue loop. Slide each lace through the loop. Depending on how much room you have in the loop, you may need to slide one lace under the other so that they’re resting on top of one another. Pull the laces all the way through so there’s no unnecessary slack in your laces.[3]

    • Do not thread each lace through the eyelet on the opposite side. You’re actually going to break the lace pattern here.
  4. Pull each shoelace through the eyelet on the same side. Lift each end of your shoelace up and pull it back to the eyelet on the same side that it started from. In other words, for the shoelace on the left side of the shoe, you slide it through the loop and then pull it back to the first open eyelet on the left side. Do this for each end of the shoelace.[4]

  5. Relace the remainder of the shoelace the same way you normally do. Resume your standard lacing pattern and continue relacing your shoes the same way they’re laced beneath the tongue loop. If you’re using the traditional crisscross method, keep alternating your laces on top of one another until you get up to the top eyelets.[5]

    • You can use any other pattern you’d like so long as the laces cross one another on their way up to the top of each shoe.

[Edit]Other Solutions

  1. Run the second-to-last row of laces behind the tongue. If you don’t have a tongue loop, unlace the top two rows of eyelets. Lift the tongue up a bit and relace your shoes by running the second-to-last row of laces behind the tongue, not on top of it. Then, relace the top row of eyelets on top of the tongue. This way, the tongue stays in place since the row of laces behind the tongue holds it up when your shoes are tied.[6]

    • This is an especially good option if you’ve got a pair of sneakers with a really large tongue that you’d like to show off.
  2. Use the extra eyelets at the top to pin the tongue down. Undo the top row of your laces and slide each lace into the eyelet at the top on the same side of the shoe. Leave a little room to create a loop. Then, run each lace through the loop on the opposite side and pull tight before tying your shoes.[7]

    • This holds your tongue in place by pinning it down once your shoes are tied. It’s an especially good option if your heels tend to slide around in your shoes, which may be causing the tongue to slip to the side.
    • Since the loop holds the laces in place at the top of the tongue, there won’t be a ton of friction pulling your tongue to one side or the other.
  3. Relace your shoes entirely if the laces are uneven at the top. If one end of your shoelaces is longer than the other, undo your laces down to the bottom row. Then, adjust the length of each lace so that they’re identical before relacing your shoes.[8]
    Stop a Shoe Tongue from Sliding to the Side Step 8.jpg
    • When the laces are uneven, there may be an asymmetrical amount of pressure on your tongue that causes it to loll.

[Edit]Video

[Edit]References



from How to of the Day https://ift.tt/3rfwdUT
via Peter

How to Defrost Frozen Banana Bread

Banana bread is a delicious treat, and it freezes really well if you're not going to eat it all at once. But, once it's gone into the freezer, what's the best way to restore that moist, crumbly texture? Luckily, thawing out banana bread is nearly as easy as actually eating it! The banana bread will thaw faster if you sliced it before you froze it, but defrosting a whole or half loaf is no big deal, either.

[Edit]Steps

[Edit]Half or Whole Loaf

  1. Leave the bread wrapped as it thaws. Take the banana bread out of its plastic bag but leave it wrapped in plastic wrap or aluminum foil. This will help contain the natural moisture of the bread, so it won't go stale as it's thawing out.[1]

    Defrost Frozen Banana Bread Step 1.jpg
    • If the bread is wrapped in plastic wrap and you're planning to heat it in the oven, unwrap it, then rewrap it in aluminum foil.[2]
  2. Thaw the bread on the counter for 2-4 hours. If you're not in a hurry, just take the bread out of the freezer and let it rest at room temperature. If you froze a whole loaf, it'll probably take about 3-4 hours for it to thaw completely. Then, just slice it and serve it up![3]
    Defrost Frozen Banana Bread Step 2.jpg
    • If you froze half of a loaf, it should be defrosted in about 2 hours.[4]
  3. Bake the bread for 40-90 minutes at to thaw it faster. Turn your oven on and pop in the bread—no need to preheat! If you're heating half of a loaf, bake it for 40 minutes, or set the timer to 90 minutes if you have a whole loaf. When you take the bread out of the oven, let it sit in the foil for about 10 minutes to cool before you slice it.[5]
    Defrost Frozen Banana Bread Step 3.jpg
    • Remember, make sure the bread is wrapped in aluminum foil—not plastic wrap![6]
  4. Store leftover bread in an airtight container for 3-4 days. If you aren't going to eat all of the bread right away, put any that's left into a plastic bag or container and seal it tightly. That will help keep it fresh while you're enjoying the leftovers.[7]

    • Don't try to refreeze the bread after it's been thawed out—the texture and flavor of the bread will suffer.[8] If there's anything left after 3 or 4 days, just discard it.[9]
    • Also, don't put the bread into the fridge. It will get soggy!

[Edit]Sliced Bread

  1. Thaw individual slices at room temp for 30 minutes. If you individually wrapped slices of banana bread to freeze them, the easiest way to thaw them out is on the counter. Just take out however many slices you want, leave them wrapped, and check them after about half an hour.[10]
    Defrost Frozen Banana Bread Step 5.jpg
    • If the slices are very thick, they could take an hour or more to thaw. Try taking them out at breakfast to enjoy with lunch![11]
  2. Put the slices in the microwave if you're in a hurry. Don't want to wait for the bread to thaw out on its own? No problem! Just unwrap the bread from its aluminum foil or plastic wrap, put it on a microwave-safe plate, and heat it for about 30 seconds. You'll be good to go![12]
    Defrost Frozen Banana Bread Step 6.jpg
    • Try spreading a little softened butter over the bread once it's warm. Not only will it be tasty, but it will add some moisture back into the banana bread, too![13]
  3. Toast the sliced bread if you like it a little crispy. No need to thaw the bread out first for this—just pop a frozen slice in your toaster or toaster oven for a normal toasting cycle. It will thaw out and toast at the same time, giving you banana bread that's still soft in the center but nice and crisp on the edges. Top it with a little butter when it's done![14]

    • You can also toast the bread in the oven, if you prefer. Preheat the oven to , place the sliced banana bread on a baking sheet, and pop it in for about 10-15 minutes. Just flip the bread over about halfway through the cooking time so it toasts evenly.[15]

[Edit]Proper Freezing

  1. Cool the bread completely before you wrap it. Don't try to freeze warm banana bread. If you wrap it up before it's cooled all the way, condensation will cause the bread to get soggy.[16]
    Defrost Frozen Banana Bread Step 8.jpg
    • Also, you should never put warm foods in the freezer. Anything warm might affect the temperature of nearby foods, causing them to thaw out.
    • If the bread is freshly baked, let it cool for at least 3-4 hours before you put it in the freezer.[17]
  2. Slice the bread if you'd like. If you know you won't eat the whole loaf at once, use a serrated knife to cut the bread into individual slices. That way, you can just thaw out a single slice whenever you want one.[18]

    • The banana bread will retain more of its moisture if you leave the loaf whole or cut it in half.[19]
  3. Wrap the bread in aluminum foil or plastic wrap. Make sure you wrap the banana bread completely, especially around the corners. That will help keep the moisture trapped in the bread, so it won't be dry and stale when you thaw it out.[20]

    • For extra protection, you can even wrap the bread in plastic wrap first, then aluminum foil.
    • Wrap individual slices in a double layer—since more of the surface area is exposed, single slices are more likely to dry out.[21]
  4. Place your wrapped banana bread in a resealable bag. To help prevent freezer burn, slide the bread slices or loaves into a zip-top plastic bag after you wrap them. Then, squeeze as much of the air out of the bag as you can without squishing the bread and close the top.[22]

    • Use a permanent marker to write the date on the bag. That way, you'll remember how long the bread has been in the freezer.[23]
  5. Use the banana bread within 3-4 months. You can keep banana bread in the freezer indefinitely. However, the taste and texture will be best if you eat it within 4 months of freezing it.[24]
    Defrost Frozen Banana Bread Step 12.jpg

[Edit]Tips

  • Use a serrated knife to cut the banana bread into neat slices. Also, move the knife in a sawing motion—don't press down hard with the knife, or the bread will be smushed.[25]
  • If you know you won't be eating the whole loaf of banana bread, freeze it as soon as possible—ideally the very first day—to preserve more moisture and flavor.[26]

[Edit]References

  1. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  2. ↑ https://foodsguy.com/freeze-banana-bread/
  3. ↑ https://www.nigella.com/ask/freezing-banana-bread
  4. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  5. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  6. ↑ https://foodsguy.com/freeze-banana-bread/
  7. ↑ https://www.nigella.com/ask/freezing-banana-bread
  8. ↑ https://www.epicurious.com/expert-advice/how-to-defrost-bread-thaw-step-by-step-article
  9. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  10. ↑ https://foodsguy.com/freeze-banana-bread/
  11. ↑ https://www.canyoufreezethis.com/can-you-freeze-banana-bread/
  12. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  13. ↑ https://foodsguy.com/freeze-banana-bread/
  14. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  15. ↑ https://www.foodfanatic.com/2019/06/how-do-you-toast-frozen-bread-in-the-oven/
  16. ↑ https://foodsguy.com/freeze-banana-bread/
  17. ↑ https://www.myrecipes.com/how-to/how-to-freeze-and-thaw-bread
  18. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  19. ↑ https://foodsguy.com/freeze-banana-bread/
  20. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  21. ↑ https://foodsguy.com/freeze-banana-bread/
  22. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  23. ↑ https://www.myrecipes.com/how-to/how-to-freeze-and-thaw-bread
  24. ↑ https://www.simplyrecipes.com/how_to_store_and_freeze_banana_bread/
  25. ↑ https://www.cooksillustrated.com/how_tos/10571-how-to-slice-bread
  26. ↑ https://www.canyoufreezethis.com/can-you-freeze-banana-bread/


from How to of the Day https://ift.tt/3r737qQ
via Peter
$3 Per Year Web Hosting