$3 Per Year Web Hosting

Monday, 2 March 2020

How to Make Bamboo Straws

Plastic straws take a long time to break down naturally, so replacing them with eco-friendly, reusable alternatives can help keep dangerous pollutants out of the environment. While you can always buy bamboo straws online or from home good stores, you can also try making your own from any healthy bamboo shoots. Bamboo straws still break down over time, but as long as you take care of them properly, you can use them for up to a year before putting them in a recycling or compost bin.

[Edit]Steps

[Edit]Cutting the Bamboo

  1. Choose healthy bamboo stalks that are as thin as a pencil. Look for shoots that are as thin or thinner than a pencil so you can comfortably drink through them. Opt for bamboo stalks that have at least between nodes, which are the horizontal bands on the stalks.[1]
    Make Bamboo Straws Step 1.jpg
    • Avoid using stalks that are thicker than since you may have difficulty using the straw.
    • Look out for spotted or rotted bamboo since it could weaken your straw or have harmful bacteria.
    • It’s okay if the bamboo stalks have slight bends or angles as long as they’re mostly straight.
  2. Clip the bamboo stalks with pruners at a 45-degree angle. Position your cut just above one of the bamboo nodes so it’s able to regrow easily after you cut it. Position the pruners so the blades make a 45-degree angle on the stalk and squeeze the handles tightly together. Leave at least 1–2 nodes on the bamboo so they can continue growing.[2]
    Make Bamboo Straws Step 2.jpg
    • Avoid making straight cuts since it can trap water and make the bamboo develop rot.
    • You can also saw the bamboo stalks at a 45-degree angle with a hacksaw if you don’t have pruners available.
  3. Leave the bamboo vertically in a dry area until it turns tan. Set the bottom end on a cinder block or brick so it’s off the ground to avoid water damage. Lean the bamboo vertically against a wall or rack to help guide any liquid inside down and out of the stalk. Let the bamboo completely dry out until it has a tan color, which usually takes around 2–3 weeks.[3]
    Make Bamboo Straws Step 3.jpg
    • Avoid laying the bamboo horizontally since it may not drain properly and could develop rot.
    • If you plan on drying the bamboo outside, try to use a south-facing wall to ensure it receives sunlight throughout the entire day.
  4. Saw the bamboo into segments between the nodes. Set the bamboo stalk on your work surface so it overhangs the edge by about . Hold the stalk firmly against your work surface with your nondominant hand and make a straight cut over from the node using a hacksaw. Then remove the node on the other side of the straw, leaving a gap. Continue cutting straws from the entire length of the stalk.[4]
    Make Bamboo Straws Step 4.jpg
    • Usually, a section of bamboo will make between 4–16 straws depending on their lengths.
    • Avoid making straws shorter than since they may not be tall enough for most cups.
    • Don’t use pruners to cut dry bamboo since you could cause the stalks to crack or splinter easier.

[Edit]Sanding and Cleaning the Straws

  1. Sand the ends of the straw with sandpaper to remove sharp edges. Place a piece of fine-grit sandpaper, such as 180- or 220-grit, over one of the straw’s cut ends. Apply firm pressure and spin the sandpaper around the straw to taper the end. If you still have trouble smoothing the edge, hold the sandpaper face-up against your work surface and rub the end of the straw against it until it feels smooth. Repeat the process on the other end of the straw.[5]
    Make Bamboo Straws Step 5.jpg
    • Avoid using the straw without sanding it first since you could easily cut your mouth or get splinters.
    • Blow the sawdust off of the straw occasionally so you can see what you’re working on.
  2. Smooth the outside of the straw with sandpaper or a belt sander. Wrap a piece of 180-grit sandpaper around the outside of the straw and rub it up and down the bamboo’s length. Rotate the straw as you work to smooth it out evenly. If you’re using a belt sander, wear safety glasses to protect yourself from kickback. Hold the ends of the straw and lightly press the side of the straw against the moving belt on the sander. Move the straw back and forth so you sand the exterior evenly, rotating the straw as you work your way around the bamboo.[6]
    Make Bamboo Straws Step 6.jpg
    • It’s okay to leave bumps or angled sections on the length of the straw if you want.
    • Don’t apply too much pressure while sanding, or else you could crack the bamboo.
  3. Run sandpaper through the middle of the straw. Cut a strip of 180- or 220-grit sandpaper that’s about wide and long. Roll the piece of sandpaper lengthwise to form it into a long coil. Feed the end of the coil into the middle of the straw and push it through the length of the straw. Pull the sandpaper out from the other side. Repeat the process 3–4 times to smooth the inside edges.[7]
    Make Bamboo Straws Step 7.jpg
    • Push the sandpaper with a thin stick or wire if you have trouble pulling it through the bamboo.
  4. Clean out the inside of the straw with a pipe-cleaning brush. Push the thin end of the pipe-cleaning brush into the middle of the straw. Rotate the brush clockwise 1–2 rotations before pulling the brush out. Continue dusting out the straw from both side s5–6 times, or until you don’t see visible dust when you remove the brush.[8]
    Make Bamboo Straws Step 8.jpg
    • Pipe-cleaning brushes usually have stiff bristles in a cylindrical or conical shape to help clean the sides of pipes, and you can buy them from your local hardware store.
    • You may also try aiming compressed air inside the straw and blowing the dust out in 1- to 2-second bursts into each side until you don’t see any more come out.

[Edit]Treating and Using the Straw

  1. Boil the straw in salt water for 10 minutes before using it. Bring of water mixed with 2 teaspoons (12 g) of table salt to a boil on your stove before putting the straws inside. Put the lid on the pot and allow the straws to boil for 10 minutes to kill any bacteria. Remove the straws from the water with a pair of tongs and set them on a towel in a well-ventilated area to cool down and dry, which will take about 30 minutes.[9]
    Make Bamboo Straws Step 9.jpg
    • Make sure you use a pot that’s large enough to fully submerge the straws, or else they won’t be disinfected properly.
    • You can use the straw as soon as it cools down.
  2. Wash and dry the straw by hand right after you’re finished using it. Use the straw as you normally would with any type of drink. When you finish the drink, give the straw a quick rinse with clean water. When you have time for a more thorough clean, rinse the straw with soapy water. Set the straw in a well-ventilated area so it can dry.[10]
    Make Bamboo Straws Step 10.jpg
    • Avoid leaving any sticky or sugary drinks dry inside of the straw since they could weaken the wood or cause buildup inside.
    • If you have buildup inside the straw, try to scrape it out with a pipe-cleaning brush.
    • Keep the straws in a dry place that’s room temperature, such as a cabinet drawer.
  3. Recycle or compost the straw if the ends begin splintering. Check the ends of the straw whenever you’re about to use it to make sure the ends aren’t cracking. If you notice the straw breaking, put it in your recycling or compost bin instead of your regular trash. Usually, your bamboo straw will last about 1 year as long as you take good care of it.[11]
    Make Bamboo Straws Step 11.jpg
    • Make multiple straws at a time so you have a replacement ready when you’re finished using another one.

[Edit]Tips

  • Make multiple straws at a time so you can bring one with you when you travel and leave one at home. That way, you always have an easy replacement as well.

[Edit]Warnings

  • Always check the ends of the straw before using them to avoid injuring yourself since they could split or splinter.
  • Wear safety glasses when using a belt sander in case the bamboo breaks while you’re working.
  • Never touch a moving belt sander since you could seriously hurt yourself.

[Edit]Things You’ll Need

  • Hand pruners
  • Hacksaw
  • Safety glasses
  • 180-grit sandpaper
  • Belt sander
  • Pipe cleaning brush
  • Pot
  • Stove
  • Table salt
  • Dish soap

[Edit]References



from How to of the Day https://ift.tt/2Ia0BMa
via Peter

How to Use a Green Screen

This wikiHow teaches you how to use a green screen to edit a custom background into a video. After filming with a green screen, you can use either Shotcut or LightWorks—both of which are free and available on Windows and Mac computers—to replace the green screen with your preferred background image or video.

[Edit]Steps

[Edit]Creating a Green Screen Video

  1. Set up your green screen. You can buy an industry standard green screen online, or you can use a lime-green sheet or poster paper in a pinch.[1]
    Use a Green Screen Step 1 Version 2.jpg
    • Your green screen should have as few wrinkles as possible, and should be one uniform color throughout.
  2. Stand at least three feet in front of the green screen. This will ensure that you don't have to worry about a shadow on the green screen, which will help when phasing out the green screen later.
    Use a Green Screen Step 2 Version 2.jpg
  3. Position your camera. You'll want your camera far enough away to capture all of your body (if applicable) in the frame, without being so far away that the green screen isn't centered in the frame.[2]
    Use a Green Screen Step 3 Version 2.jpg
  4. Shoot your video. Record yourself or your subject in front of the green screen. Make sure that any movements or objects in the frame stay in front of the green screen, as anything shot outside of the green screen frame will end up being cut from the final video.
    Use a Green Screen Step 4 Version 2.jpg
  5. Move the video onto your computer. Once you've finished recording the video, you'll need to put it on your computer so that you can edit it.
    Use a Green Screen Step 5 Version 2.jpg
    • If the video is on a phone, consider uploading it to a cloud service like Google Drive and then downloading it onto your computer from there.
    • If the video is on an SD card, you can usually insert it directly into your computer (or a USB/SD card adapter that's plugged into your computer) to move the video.

[Edit]Editing with Shotcut

  1. Check your computer's bit number. In order to download Shotcut, you need to know whether your computer uses a 32-bit system or a 64-bit system.
    Use a Green Screen Step 6 Version 2.jpg
    • Skip this step if you're on a Mac.
  2. Download Shotcut. Go to https://www.shotcut.org/download/ in your browser, then click your operating system's download link to begin the download:
    Use a Green Screen Step 7 Version 2.jpg
    • Windows - Click either 64-bit Windows installer or 32-bit Windows installer depending on your computer's bit number.
    • Mac - Click macOS below the "macOS" heading.
  3. Install Shotcut. Once the setup file finishes downloading, do the following:
    Use a Green Screen Step 8 Version 2.jpg
    • Windows - Double-click the Shotcut setup file, click Yes if prompted, click I agree, click Next, click Install, and click Close when the installation finishes.
    • Mac - Double-click the Shotcut DMG file, click and drag the Shotcut icon onto the Applications folder shortcut, and verify the software if prompted. Follow any other on-screen instructions as they appear.
  4. Open Shotcut. Open Start (Windows) or Spotlight (Mac), then type in and click or double-click Shotcut in the search results.
    Use a Green Screen Step 9 Version 2.jpg
  5. Enable the "Playlist" and "Timeline" sections. Click the Playlist tab at the top of the window, then click the Timeline tab at the top of the window. You'll see a "Playlist" section appear on the left side of the Shotcut window, while the "Timeline" section will appear at the bottom of the window.[3]
    Use a Green Screen Step 10 Version 2.jpg
  6. Import your green screen video and background. Click Open File in the upper-left side of the Shotcut window, select the green screen video and its background by clicking one file and then holding down (or on a Mac) while clicking the second file, and click Open in the bottom-right corner of the window. The file names will appear in the Playlist section.
    Use a Green Screen Step 11 Version 2.jpg
    • You can use a video or an image as your green screen video's background.
  7. Create two video channels. Click ≡ in the upper-left side of the Timeline section, click Add Video Track in the pop-up menu, and then repeat this process once more to add a second video channel.
    Use a Green Screen Step 12 Version 2.jpg
  8. Insert your video in the first channel. Click and drag your green screen video from the Playlist window onto the top channel in the Timeline section, then drop it.
    Use a Green Screen Step 13 Version 2.jpg
  9. Add your background to the second channel. Click and drag the background photo or video onto the second channel at the bottom of the Timeline section, then drop it.
    Use a Green Screen Step 14 Version 2.jpg
    • If you're using a background video, the video should be the same length as your green screen video.
    • If you're using a background image, you'll need to click and drag the image's left or right edge to extend it to be the length of the video.
  10. Select the green screen video channel. It should be at the top of the Timeline section.
    Use a Green Screen Step 15 Version 2.jpg
  11. Click the tab. This option is at the top of the window. A "Filters" menu will appear in the Playlist section.
    Use a Green Screen Step 16 Version 2.jpg
  12. Click . You'll find this below the "Filters" menu. Doing so will open a list of available filters in the Playlist section.
    Use a Green Screen Step 17 Version 2.jpg
  13. Click the "Video" icon. It's a computer monitor-shaped icon below the Playlist section. This will show all available video filters.
    Use a Green Screen Step 18 Version 2.jpg
  14. Click . You'll find this in the middle of the Playlist window. Doing so opens the green screen settings.
    Use a Green Screen Step 19.jpg
  15. Adjust the green screen distance. Click and drag the "Distance" slider to the right until your green screen replacement image or video appears in place of the green screen on the right side of the window.
    Use a Green Screen Step 20.jpg
    • As a general rule, you want to avoid moving this slider over to the "100%" mark.
  16. Preview your movie. Click the "Play" triangle below the movie window on the right side of the window, then adjust your green screen as needed. If you can see a large amount of the green screen, drag the "Distance" slider to the right; if you can't see enough of the background, drag the slider left.
    Use a Green Screen Step 21.jpg
  17. Export your movie. Click File, click Export Video..., click Export File at the bottom of the menu, and type into the "File name" (or "Name" on Mac) text field, replacing "name" with whatever you want to name your file. Click Save when you're done to begin exporting the file.
    Use a Green Screen Step 22.jpg
    • Exporting may take several minutes to several hours based on the video's size and resolution.

[Edit]Editing with LightWorks

  1. Open the LightWorks download page. Go to https://www.lwks.com/ in your browser, then click the blue Download Now button in the upper-right side of the page.
    Use a Green Screen Step 23.jpg
  2. Select your operating system. Click the Windows tab or the Mac tab depending on which type of computer you use.
    Use a Green Screen Step 24.jpg
  3. Download LightWorks. For a Windows computer, click Download 32-bit for a 32-bit operating system, or click Download 64-bit for a 64-bit operating system.
    Use a Green Screen Step 25.jpg
  4. Install LightWorks. Once the LightWorks setup file finishes downloading, do the following:
    Use a Green Screen Step 26.jpg
    • Windows - Double-click the setup file, click Yes when prompted, select a language and click OK, click Next, check "I accept" and click Next, click Next three more times, enter a random number, and click Install. Click Next and then Finish when the installation completes.
    • Mac - Open the LightWorks DMG file, click and drag the Shotcut icon onto the Applications folder shortcut, and verify the software if prompted. Follow any other on-screen instructions as they appear.
  5. Open LightWorks. To do so:
    Use a Green Screen Step 27.jpg
    • Windows - Double-click the red LightWorks icon on your desktop.
    • Mac - Click the LightWorks app icon in your Mac's Dock, or click Spotlight , type in , and double-click the lightworks result.
  6. Click . It's a link in the upper-left corner of the window.
    Use a Green Screen Step 28.jpg
  7. Set up your project. In the pop-up window that appears, do the following:[4]
    Use a Green Screen Step 29.jpg
    • Enter a name in the "Name" text field.
    • Click the "Frame rate" drop-down box.
    • Click Mixed rates
    • Click Create
  8. Click the tab. It's near the upper-left side of the window.
    Use a Green Screen Step 30.jpg
  9. Select files. Click the green screen video that you want to use, then hold down (Windows) or (Mac) while clicking the image or video that you want to use as the background.
    Use a Green Screen Step 31.jpg
    • If you don't see the files that you want to use, click the Places button and then select the folder in which your files are stored in the drop-down menu.
  10. Click . It's in the lower-left corner of the window. This will import your files into LightWorks.
    Use a Green Screen Step 32.jpg
  11. Click the tab. This option is at the top of the LightWorks window, just right of the LOG tab.
    Use a Green Screen Step 33.jpg
  12. Create a second video track. Right-click the horizontal track section at the bottom of the window, click Tracks in the drop-down menu, and click Add video in the pop-out menu. You should see a "V2" track category appear on the left side of the window.
    Use a Green Screen Step 34.jpg
  13. Add your files to the track area. Click and drag your green screen video into the "V1" section of the track area and drop it there, then drag the image or video that you want to use as a background into the "V2" section.
    Use a Green Screen Step 35.jpg
    • If you're using a background video, the video should be the same length as your green screen video.
    • If you're using a background image, you'll need to click and drag the image's left or right edge to extend it to be the length of the video.
  14. Click the tab. It's at the top of the LightWorks window.
    Use a Green Screen Step 36.jpg
  15. Add the green screen Chroma key effect. Right-click the "V1" track at the bottom of the window, click Add, click the Key category, and click Chromakey in the menu.
    Use a Green Screen Step 37.jpg
  16. Select your green screen. Click the eyedropper icon to the left of the "Saturation" section, then click the green part of the green screen. This will select any matching color as the item to replace with your background image or video.
    Use a Green Screen Step 38.jpg
  17. Adjust the green screen. Click and drag the "Remove spill" slider that's on the left side of the page to the right. Doing so minimizes the amount of green that you'll see due to inconsistent color in your green screen.
    Use a Green Screen Step 39.jpg
  18. Preview the video. Click the triangle-shaped "Play" button below the video on the right side of the window to see how your video turned out.
    Use a Green Screen Step 40.jpg
    • If you need to adjust the green screen some more, do so on the left side of the window.
  19. Export your video. To do this, click the EDIT tab again, right-click the track section, click Export, click YouTube, uncheck the "Upload to YouTube.com" box if it's checked, and click Start in the bottom-left corner of the drop-down menu. This will convert the project into a playable video file.
    Use a Green Screen Step 41.jpg
    • Exporting may take several minutes to several hours based on the video's size and resolution.

[Edit]Tips

  • Never wear any shade of green in front of a green screen, as doing so will cause your clothing to blend into the background.[5]

[Edit]Warnings

  • LightWorks is free to use, but several features (such as the ability to export to a file type like MP4) are locked if you don't own the paid Pro version.


[Edit]References

[Edit]Quick Summary



from How to of the Day https://ift.tt/2TzaDvB
via Peter

How to Season Cast Iron in the Oven

Cast iron pans, skillets, and Dutch ovens are some of the best tools you can have in your kitchen. Their versatility and ability to heat evenly make them popular for stovetop and oven cooking. However, they also have to be cleaned and seasoned in a specific way to guard against rust. Before using cast iron for the first time, wash it thoroughly in soap and water. You can then give it a thin coating of a heat-resistant fat like vegetable oil to bake into its surface. Seasoning cast iron means covering it with a layer of blackened oil, and that seasoning can make a pot or pan last for decades.

[Edit]Steps

[Edit]Cleaning Cast Iron

  1. Preheat the oven to . Let your oven warm up while you’re busy preparing the pan. You can use it to finish drying the cast iron in addition to seasoning it. However, make sure it doesn’t get too hot, or else it could overheat the cast iron and even burn the oil used for seasoning later.[1]
    Season Cast Iron in the Oven Step 1 Version 2.jpg
    • Any temperature from is fine, so you won’t have a problem even if your oven isn’t precise.
  2. Use a sponge to thoroughly scrub the cast iron with soapy water. Pour about of your regular dish detergent onto the cast iron. Run hot water in your sink, then scrub the cast iron all over with a sponge. Eliminate any noticeable debris on the surface so it doesn’t get in the way of the oil coating used for seasoning.[2]
    Season Cast Iron in the Oven Step 2 Version 2.jpg
    • Focus on the inner part of the item, but don’t neglect the outer part. It too needs to be seasoned.
    • To remove stubborn debris, scrub the cast iron with a nylon kitchen brush or a nonabrasive scrub pad. Avoid anything that could potentially leave scratches in the metal.
  3. Rinse the cast iron with clean water. Wash off all of the soap and any debris. Once it is clean, dry it with a clean cloth or paper towel. Remove as much of the moisture as you can. Any water left on cast iron long-term can cause it to rust.[3]
    Season Cast Iron in the Oven Step 3 Version 2.jpg
    • Normally, using lots of water is bad for cast iron. Since you’re going to dry and season your right away, washing it clean is safe.
  4. Put the cast iron in the oven for 5-10 minutes to remove all moisture. Place the cast iron on the middle rack in your oven. If it doesn’t have a middle rack, you can use a higher one instead. Set a timer and come back afterward to take the item out of the oven.[4]
    Season Cast Iron in the Oven Step 4 Version 2.jpg
    • Preheating the cast iron removes any remaining moisture on it and helps the oil coating spread more evenly. You can effectively season cast iron without doing this, but it’s a short step that improves the final result.
  5. Set the cast iron on a heat-safe surface after taking it out of the oven. Since it wasn’t in the oven for long, the cast iron won’t be extremely hot. However, it can still cause damage, so be careful when handling it. Pull it out with an oven mitt, then set it somewhere safe, such as your stovetop.[5]
    Season Cast Iron in the Oven Step 5 Version 2.jpg
    • In most cases, you won’t have to wait for the cast iron to cool before seasoning it. Place your hand near it to detect any heat coming off of it. If it feels too hot to handle, give it 2 to 3 minutes to cool.
    • Keep in mind that the heat of the cast iron will vary depending on how hot your oven gets and what temperature you set it to earlier. Every oven is a little different.

[Edit]Oiling the Cast Iron

  1. Pour about of vegetable oil onto the cast iron. Add the oil, then tip the cast iron from side to side to spread it around. Make sure the entire surface is well-coated with the oil. Depending on the size of the piece you’re seasoning, you may need to add a little extra oil to finish coating it.[6]

    • If you don’t have vegetable oil, canola oil, lard, shortening, flax oil, and even bacon grease are also safe to use. As long as you use something oily that resists moderate heat, you can season cast iron with it.
  2. Spread the oil around the inside of the cast iron with a clean cloth. Rub the oil all over the inside of your item, including around the sides and rim. Make sure the oil forms a thin, consistent layer over the entire interior portion of the item. When you’re done spreading it around, wipe the cast iron down with a clean part of the rag to remove any excess oil still in it.[7]

    • Even if the cast iron looks dry, wipe it down. There is always a little extra oil left on the surface, and it will drip off into your oven if it isn’t removed now.
  3. Flip the cast iron and spread of oil around its exterior. The exterior portion also benefits from seasoning. Pour the oil over the item, then use a cloth to rub it in. Keep applying more oil as needed to cover the entire exterior in a thin but consistent coating. Wipe off the excess when you’re done.[8]

    • Remember to get the handle in addition to the sides and bottom portion of your item. These spots will rust too if they aren’t well-maintained.

[Edit]Heating Cast Iron in an Oven

  1. Place the cast iron upside down on your oven’s middle rack. Be careful, since your oven will still be hot from earlier. Wear an oven mitt when sliding the cast iron into the middle part of your oven. If you don’t have a middle rack, you can put the cast iron on a higher rack.[9]

    • Leave plenty of space near the bottom of the oven for another pan or at least a rack with aluminum foil over it.
  2. Fit a piece of aluminum foil underneath the cast iron on the bottom rack. The sheet of foil is there to catch any oil dripping off the pot. If it falls onto the heating element, it could begin to smoke or burn. You could also use another pan, such as a baking tray, to catch the oil.[10]

    • If you spread the oil in a thin enough layer, little to no oil will fall from it. Still, place something underneath the cast iron for safety.
  3. Bake the cast iron in the oven for 1 hour. Set a timer and wait as the cast iron heats up. It will get very hot during this time, but not hot enough for the oil to burn. Instead, the oil will bake into the cast iron to form a protective non-stick surface.[11]
    Season Cast Iron in the Oven Step 11 Version 2.jpg
    • Watch for any signs of smoking, sizzling oil. If you notice any issues, turn off the oven and let it cool down. Soak up any spilled oil with a paper towel.
  4. Turn off the oven and let the cast iron cool for 2 to 3 hours. It will be very hot, so don’t rush to take it out. After several hours have passed, open the oven door and put your hand close to the cast iron. If you feel a lot of heat coming off of it, leave it to cool for a little longer. Otherwise, you can begin using it right away.[12]
    Season Cast Iron in the Oven Step 12 Version 2.jpg
    • If the cast iron is still a little warm, be sure to put it on a heat-safe surface, such as your stovetop.
    • You can season cast iron multiple times by applying more oil. Once is enough for most pieces of cast iron, but seasoning repeatedly leads to a stronger, thicker non-stick coating.
  5. Clean and store cast iron in a dry spot after using it. Once cast iron is well-seasoned, you can use it to cook almost anything, from meats to desserts. If you aren't using it immediately, put the cast iron safe in a moisture-free spot with good air circulation. It can be left out on your countertop, stovetop, or placed in the oven, for instance. If it has a lid, place a paper towel underneath the lid so air can get it.
    Season Cast Iron in the Oven Step 13 Version 2.jpg
    • After cooking with your cast iron, wait for it to cool down. While it’s slightly warm, clear off any debris with a little bit of soap, warm water, and a sponge or soft-bristled brush. Apply the fresh layer of oil with a cloth or paper towel, then wipe off the excess. You could also heat the cast iron at about for 15 to 20 minutes to further bake in the oil.[13]
    • After drying it, cover it with another coating of oil to keep it well-seasoned.

[Edit]Tips

  • Cast iron can also be seasoned by oiling and heating it on a stovetop, unless you have a glass one. Glass stovetops are prone to scratches and often fail to heat cast iron pans evenly unless they have flat bottoms.[14]
  • To clean cast iron after cooking, wipe it with paper towels while it is still warm. You can wash it in a little warm water, but dry it right after and scrub in another coating of cooking oil to prevent rust.[15]
  • After seasoning cast iron, wash it with a mild soap as needed to remove tough debris. Avoid strong degreasing cleaners that can wear our your cookware and remove its oil coating.[16]
  • Rusty cast iron is fixable with fine steel wool, hot water, and dish soap. Scrub it clean before reseasoning it.[17]

[Edit]Warnings

  • Cast iron gets very hot during the seasoning process, so be careful to avoid handling it without an oven mitt. Give it plenty of time to cool down afterward.
  • The oil used in the seasoning process could smoke or even catch fire if you’re not careful. Use something with a high smoke point, like vegetable oil, and line a lower rack with foil to catch drips.

[Edit]Things You’ll Need

  • Dish soap
  • Clean cloths or paper towels
  • Vegetable oil
  • Warm water
  • Aluminum foil or oven-safe pan
  • Oven

[Edit]References



from How to of the Day https://ift.tt/2PG7ybP
via Peter
$3 Per Year Web Hosting