$3 Per Year Web Hosting

Tuesday, 5 June 2018

How to Use a Tension Rod

Tension rods are a convenient way to divide space or hang light curtains. They're fairly easy to install and remove since you don't need any additional hardware to use them. With a little bit of creativity, however, you can use them for other purposes too, such as hanging paper towel rolls, organizing your baking sheets, or creating pet barriers!

EditSteps

EditInstalling a Tension Rod

  1. Measure the space between 2 facing surfaces. A tension rod needs to be placed in between 2 hard, flat surfaces that face opposite one another, such as the space between 2 closet walls, 2 cabinets, or in a window frame. Use a measuring tape to measure the distance between these 2 surfaces so that you know what length to get.
    Use a Tension Rod Step 1 Version 2.jpg
    • Even though tension rods are adjustable, they can only expand so much. You may need to buy a longer rod.
  2. Purchase a rod that's longer than your measurement. Tension rods lose their strength as you expand them. If you were to expand a tension rod to its full length, it won’t be able to hold up very much weight at all. As such, you should buy a rod that's longer than what you need when fully expanded.
    Use a Tension Rod Step 2 Version 2.jpg
    • For example, if you need to fill a space, get a rod that can expand up to .
    • Check the weight capacity of your tension rod as well. If you will be hanging heavy items from it, you will need something with a larger weight capacity.
  3. Push the tension rod through a curtain, if desired. If your window is very wide, adding 2 curtain panels might be more convenient. In either case, make sure that the entire curtain is on the rod and that the ends are exposed; you don’t want to trap the ends of the curtain when installing the rod.
    Use a Tension Rod Step 3 Version 2.jpg
    • Alternatively, slide curtain rings onto the rod; you can use the clips that are attached to the rings to hang your curtain later.
    • You don't need to do this step if you won't be adding curtains.
  4. Twist both ends of the tension rod to unlock it. If you take a look at your rod, you'll notice that it is actually made up of 2 rods that are set into one another. Grab hold of the rod to either side of the center seam. Twist the thinner rod clockwise or counterclockwise to unlock it; the direction may vary from brand to brand.
    Use a Tension Rod Step 4 Version 2.jpg
    • Hold onto both ends firmly after you unlock it. Don't let the rod expand wider than the space you need to fill.
    • If you put a curtain on your rod, scrunch the curtain towards the middle so that you have something to grab on to.
  5. Slide the tension rod between the 2 walls and let it expand. If you need to, push both ends of the rod towards the middle. Slide it into the space between your 2 walls, then loosen your hold on the rod so that it can expand.
    Use a Tension Rod Step 5 Version 2.jpg
    • The spring inside the rod will push the ends away from each other. This tension will cause the rod to become wedged between the 2 walls.
    • If you added curtain rings earlier, now is the time to clip the top of the curtain to the hooks that are attached to the rings.
  6. Remove the rod by compressing it. Hold 1 end of the tension rod and pull it down first; this should be enough to loosen it so that you can pull it out. If it doesn't, press both ends of the rod towards the middle to compress it, then pull it down.
    Use a Tension Rod Step 6 Version 2.jpg
    • If the rod is still stuck, ask someone to compress it for you while you pull down on it.
    • To store the rod, compress it all the way, then twist the narrower rod counterclockwise or clockwise to lock it.

EditOrganizing in Your Kitchen

  1. Add a rod under your sink, then hang spray bottles from it. Open the cabinet beneath your kitchen sink. Place a tension rod horizontally inside the cabinet, then hang your cleaning detergents from it.[1]
    Use a Tension Rod Step 7 Version 2.jpg
    • This only works for cleaning detergents that come in a spray bottle. The trigger will act like a hook.
    • Hang the rod high enough so that you have room under the spray bottles for other items.
    • Maximize your storage by adding a small pail, basket, or caddy. Place items like sponges or scrubbies inside.
  2. Place rods vertically between 2 shelves to create slots for baking sheets. Stand 2 tension rods vertically between 2 shelves. The first rod should be from the edge of the self. The second rod should be from the back of the shelf. Repeat this process to create more slots, then slide cutting boards and baking sheets between the slots.[2]
    Use a Tension Rod Step 8 Version 2.jpg
    • How far apart you keep the tension rod pairs is up to you. You need them to be far enough to fit a cutting board or baking sheet. About should be plenty.
  3. Use tension rods in deep drawers to organize lids. Open up a kitchen drawer that is deep enough to store your lids. Insert a few tension rods, about apart to create slots. Slide your desired lids vertically into the slots, like files into a filing cabinet.[3]
    Use a Tension Rod Step 9 Version 2.jpg
    • You can insert the rods across the width of the drawer or down its length. It's up to you.
    • How far down the drawer you place the rods is up to you. About 1/3 to 1/2 way down is ideal.
    • Use the front half of the drawer to store the lids, and the back half to store the matching pots, pans, or Tupperware containers.
    • You can use this technique to store other items too, like rolls of aluminum foil or plastic wrap.
  4. Elevate spice jars with a tension rod to save space. Open up your cabinet and arrange your spice jars in a row along the back. Insert a tension rod just above jars, then stand more spice jars on top of it.[4]
    Use a Tension Rod Step 10 Version 2.jpg
    • If the spice jars won't stand up on the tension rod, move the rod forward by about to create a small gap. The jars will tilt back into this gap.
    • You can create more "shelves" by adding more rows of tension rods.
  5. Use a tension rod as a paper towel rack under a cabinet. Slide a roll of paper towels onto the rod first, then place the rod horizontally under a cabinet. Expand the rod until each end is braced firmly against the adjacent walls. You can also use this to store kitchen towels above a sink.[5]
    Use a Tension Rod Step 11 Version 2.jpg
    • Make sure that you hang it low enough so that you can unravel the paper towels without them scrapping against the bottom of the cabinet.
    • If you are using this as a hand towel rod, you can hang other items from the rod too, like spray bottles and scrubbies.

EditOrganizing Other Rooms

  1. Use a tension rod to store rolls of paper or ribbon. Slide a roll of wrapping paper onto the rod, then place the rod between 2 shelves or walls. Repeat the process with rolls of ribbon, then place it below or above the wrapping paper.[6]
    Use a Tension Rod Step 12 Version 2.jpg
    • Stagger the rods. The lower rod should be closer to you, while the upper rod should be further back and closer to the wall.
    • Maximize your craft storage by hanging baskets from the rods. Place items like scissors or tape into these baskets.
  2. Put several rods into a closet and use them as a shoe rack. You will need 2 rods for each row of shoes. Place 1 rod towards the back of the closet, about from the wall. Place the second rod about below it, and towards the front of the closet. Set your shoes on top of the rods, with the toes pointing forward.[7]
    Use a Tension Rod Step 13 Version 2.jpg
    • The exact distance between the rods depends on the length of your shoes. The smaller your shoes are, the closer together the rods should be.
    • If your shoes have heels, you can create a steeper angle between the 2 rods, because the heels will hold onto the first rod.
  3. Use a tension rod to display your scarves, bags, or jewelry. Add some S-shaped shower hooks onto a tension rod, then place the rod into your closet. Use the hooks to hang things like scarves, bags, or necklaces.[8]
    Use a Tension Rod Step 14 Version 2.jpg
    • If you are using scarves, you can hang them directly onto the rod without hooks. Keep them in place with slipknots.
    • A slipknot is where you fold a scarf in half, tuck the folded end behind a rod to make a loop, then pull the tails through the loop to tighten the knot.
  4. Maximize your closet storage with tension rods and shelving units. Place a shelving unit into the middle of your closet, right against the back wall. Place a tension rod to the left of the shelf, near the top, and a second rod towards the middle. Repeat this with another set of rods to the right of the shelf.[9]
    Use a Tension Rod Step 15.jpg
    • Use the shelf to store folded garments, like jeans and T-shirts. Use the rods to hang nicer garments, like blazers and dress shirts.
    • How much space you leave between the tension rods depends on the length of your clothes. Hang them high enough so that the hems of your clothes don't bunch up.
    • The width of the shelving unit is up to you, but something that's about one-third the width of your closet would be ideal.
  5. Add a tension rod to your bath or shower to store extra products. Place this tension rod against the wall, so that it is opposite to the shower curtain. Add S-shaped shower hooks to the rod, then hang your loofahs, scrubbies, and other items from the hooks.[10]
    Use a Tension Rod Step 16.jpg
    • Hang a mesh shoe pocket organizer from 2 hooks, then fill the pouches with shampoo and conditioner bottles.
    • The shoe organizer must be made from mesh, otherwise it will collect water and develop mildew.

EditFinding Other Uses for Tension Rods

  1. Hide clutter with custom curtains. Measure the height and width of the space you want to cover, such as under a bed or desk. Sew a curtain panel according to these measurements, then slide it onto a tension rod. Insert the tension rod under the bed or desk legs, then adjust the curtain to your liking.[11]
    Use a Tension Rod Step 17.jpg
    • Instead of sewing 1 long panel, sew 2 to 3 narrower panels. This will make it easier to access the things you need.
    • This works great for bunk beds, shelves, and entertainment cabinets. You can even use it in place of closet doors.
    • If you have a cat, place the litter box under a table, then cover the sides of the table with your makeshift curtains.
  2. Place a tension rod in a sunny window and hang plants from it. Slide small metal pails onto a tension rod, then place the rod into a sunny window. Place potted herbs into the pails for an instant, mini herb garden![12]
    Use a Tension Rod Step 18.jpg
    • Don't plant the herbs directly into the pails as they don't have good drainage. Put them into smaller plastic pots first, or leave them in the pots that they came in.
  3. Convert a deep drawer into a filing cabinet with 2 tension rods. Place 2 tension rods inside a deep drawer, 1 on each side. Get some hanging file folders meant for a filing cabinet, and place them inside the drawer; the hooks will sit right on the rods.[13]
    Use a Tension Rod Step 19.jpg
    • Place the rods down the length of the drawer on the left and right sides. Don't place them towards the front and back.
    • The rods need to be high enough so that they can hold up the folders. About from the bottom should be enough.
    • Thin, slender rods will work the best for this. Don't use thicker ones, or they will create too much bulk.
  4. Attach a tension rod to both sides of a curtain to create a pet barrier. Decide on the height of your pet barrier, then sew a curtain panel that has a pocket on both the top and bottom edges. Slide a tension rod through each pocket, then insert it into your doorway. If you need to, use thumbtacks to secure the sides of the curtain to your doorframe.[14]
    Use a Tension Rod Step 20.jpg
    • The bottom edge of the curtain must have a pocket and be attached to the bottom rod, otherwise your pet will just crawl under it.
    • Use 1 panel for this, not 2, otherwise your pet will find a way to crawl between the panels.
    • The barrier needs to be tall enough so that your pet can't climb over it, but low enough so that you can step over it.
  5. Slide a tension rod through the handles of drawers to baby-proof them. Simply close all of your drawers, and slide your tension rod vertically down through all of the handles. Keep in mind that this only works with drawers that have C-shaped handles, and not with knobs.[15]
    Use a Tension Rod Step 21.jpg
    • This is best for drawers that you don't use regularly, as you will need to remove the tension rod each time that you want to open them.
    • This is also a great solution for nosey pets who have learned how to open drawers.

EditTips

  • If you're worried about a rod slipping, screw a plastic bottle caps onto the walls first, then set the rod into them. They will act as cups or brackets to hold the rod up.[16]
  • If you need to, use a stepladder or a stepstool to reach the area you want to add the tension rod.
  • Tension rods come in all sorts of colors and finishes. Choose the one that matches your room.
  • In general, thicker tensions rods are best for heavy-duty jobs, like holding up curtains. Thinner tension rods are better for lightweight jobs, like creating dividers.

EditWarnings

  • Tension rods can dent drywall. Place them over studs, or insert brackets.[17]

EditThings You'll Need

  • Tension rod
  • Stepladder (optional)
  • Curtain (optional)
  • Curtain hooks/rings (optional)

EditSources and Citations


Cite error: <ref> tags exist, but no <references/> tag was found




from How to of the Day https://ift.tt/2LXuAHH
via Peter

These Tweets About Kids Renaming Random Things Prove That Kids Are Way Smarter Than Us

Would you rather ride in a boring old elevator or in an uppy room?


View Entire Post ›



from BuzzFeed - Animals https://ift.tt/2Je52EE
via IFTTT

How to Fix Vinyl Scratches

While there is no foolproof way to repair scratches on vinyl, you can try using wood glue to remove dust and even out the surface of your record. Clean your record with a dry brush, liquid cleaning solution, or a toothpick to remove additional dirt and debris. To prevent scratches, always hold your record from the edges and store it properly when not in use. If your record still skips after cleaning it a few ways, you may need to purchase a new one.

EditSteps

EditUsing Wood Glue

  1. Apply wood glue over the entire record as it spins on your turntable. Place the tip of your wood glue at the edge of your inner label, and squeeze the bottle with light pressure. As the record spins, continue squeezing out the glue so it creates lines around your record. Stop when you reach the outer edge. You should have thin, even lines over all of your record.[1]
    Fix Vinyl Scratches Step 1.jpg
    • Your record will have stripes of glue following the circular grooves of the vinyl.
    • If you squeeze out too much glue on the vinyl, that's okay. You will even out the amount of glue. However, if you use too much towards the outer edge, use a paper towel to wipe up the excess.
    • If you are worried about getting glue on your turntable, you can apply the glue to the record on a table instead. The spinning of the turntable helps spread the glue across your record.
  2. Use a piece of cardboard or cardstock to spread the glue. Take a piece of cardboard or cardstock about wide, and touch it to the outer edge of your record. Let your record continue to spin, and the glue will spread out and cover the record as it moves. Then, lift up on your card and place it at the inside of your record to spread out all of the glue.[2]
    Fix Vinyl Scratches Step 2.jpg
    • You can leave your hand stationary and let the spin of the record spread the glue for you.
    • You will have a smooth, even surface of wood glue covering the entirety of your record.
  3. Stop your turntable and let your the glue dry for around 24 hours. You can leave your record on your turntable overnight. To see if the wood glue is dry, you can gently touch the outer edge of the glue with your finger. If it still feels sticky, let it sit for 1-2 more hours and try again.[3]
    Fix Vinyl Scratches Step 3.jpg
    • You can also leave your record on a piece of newspaper to dry if you do not use a turntable.
  4. Peel away the dried wood glue starting at the outer edge of your record. Using your index finger and your thumb, pull up on the outer edge of the wood glue. Then, lift up with steady, consistent force to peel away all of the glue. Remove the glue slowly and gradually to try to pull it up in 1 piece.[4]
    Fix Vinyl Scratches Step 4.jpg
    • If your wood glue does not peel in 1 solid layer, that’s okay! Lift up at another edge and peel away the glue until it is completely removed.
    • Avoid touching the surface of your record as you peel away the glue.
  5. Play your record to test the sound. Put the arm of your turntable onto your record and power it on. Listen to your record, and the part of the song that used to skip may play clearly now. Wood glue can help your vinyl by capturing even the toughest dirt and dust.[5]
    Fix Vinyl Scratches Step 5.jpg
    • Keep in mind that using wood glue does not guarantee your record will be fixed.
    • The wood glue provides a thorough clean of the entire record by removing any dirt and debris and smoothing over uneven vinyl surfaces.
    • If your record still skips, try another coat of wood glue or another vinyl cleaning method. You could also search online for a professional vinyl restorer near you.

EditCleaning Away Dirt

  1. Use a dry vinyl brush to remove surface dirt and dust. Place your record on your turntable and turn it on. While the record spins, lightly hold the brush on the surface of your record to sweep away any impurities and static build-up. Keep your brush on your record for 1-3 spins, then angle your brush at the edge of your record and slowly remove it.[6]
    Fix Vinyl Scratches Step 6.jpg
    • Most record brushes have 2 rows of bristles, 1 to sweep of the dust, and 1 to remove static.
    • Be sure to clean your brush after each use. That way, you do not spread debris to and from your cleaning brush.
    • While this will not erase scratches, it will help your turntable pick up as many grooves in your record as possible, helpful to avoid skipping parts of the song.
  2. Purchase a record cleaning kit to use professional cleaning products. Visit a music store or search online to find a kit. Most come with a liquid cleaning solution, directional brush, and smaller brush used to clean the directional brush. Then, follow the specific directions outlined in your kit’s instructions to clean away surface debris.[7]
    Fix Vinyl Scratches Step 7.jpg
    • Your directions will likely have you apply the cleaning solution, then use the brush to sweep away extra dirt.
  3. Make your own cleaning solution to deep clean on a budget. Combine ¼ cup of 90-99% isopropyl alcohol, ¾ cup of distilled water, and 1 or 2 drops of dishwasher fluid in a spray bottle. Place your record on a microfiber cloth, and spray the solution on your record. Wait 30 seconds to let the liquid fill the grooves, and wipe away the liquid with another microfiber cloth. Then, soak another microfiber cloth in distilled water, and wipe off both sides of your record.[8]
    Fix Vinyl Scratches Step 8.jpg
    • This will remove fingerprints and grime that a record cleaning brush cannot pick up.
    • Avoid spraying the label of your record.
    • You can repeat the process for both sides of your record to thoroughly clean away dirt and dust.
  4. Rub a toothpick back and forth over the scratches with soft pressure. Locate the scratches of your record, and angle 1 wooden toothpick at the scratch. Apply a little pressure, and rub back and forth on the scratch. Do this for any and all scratches on your vinyl. Rubbing the scratch with a toothpick helps get into the small cracks and lift up stubborn debris.[9]
    Fix Vinyl Scratches Step 9.jpg
    • Take your time when cleaning with a toothpick and be careful not to scratch other areas of your record.
    • This may not fix the scratch, but it can help remove any surface debris from your vinyl.

EditProtecting Your Vinyl

  1. Place your record in its inner sleeve after you finish listening to it. Plastic sleeves come in either paper or plastic material. When you finish listening to a record, carefully slide your record in between both sides of material as a first line of defense.[10]
    Fix Vinyl Scratches Step 10.jpg
    • Your vinyl will come with an inner sleeve when you purchase it. You can also purchase replacement sleeves online or in music stores.
  2. Store your record in its outer sleeve when not in use. When you purchase a record, it comes in a cardboard outer sleeve. You can also purchase replacement plastic sleeves. After you place your record into its inner sleeve, slide it into its outer sleeve. The outer sleeve adds another layer of defense.[11]
    Fix Vinyl Scratches Step 11.jpg
    • If your outer sleeve is worn and you can see the ring of your record, consider purchasing a replacement plastic outer sleeve.
  3. Designate a shelf or crate for your record collection. When you expand your record collection beyond 1 or 2 records, it is important to keep them safe to prevent damages. You can securely keep your record either on a shelf or in a crate, and always store them vertically.[12]
    Fix Vinyl Scratches Step 12.jpg
    • You can purchase a shelf or crate at a home store or online. You can also make your own!
    • Keeping your records in piles can warp the records or the covers.
  4. Avoid touching any part of your vinyl besides the edges and inner label. Handing your record correctly prevents scratches, dirt, and fingerprints from appearing on your record. The grooves of your record are delicate and contain the musical information to play the songs, so do your best to not touch them.[13]
    Fix Vinyl Scratches Step 13.jpg
  5. Close your turntable’s lid if you have one to prevent airborne dust. Some turntables have an attached lid. When you are finished listening to your vinyl, flip the lid overtop of the turntable to keep out dust and debris.[14]
    Fix Vinyl Scratches Step 14.jpg
    • Keeping your turntable free of dust is helpful because it lowers the risk of transferring dust onto your record.

EditTips

  • Keep your record out of direct sunlight, heat, or cold areas. Drastic temperatures can warp your record and cause inconsistent playback.

EditWarnings

  • Never clean your record with rubbing alcohol, lighter fluid, furniture polish, toothpaste, or steel wool. All of these can cause permanent damage to your vinyl.[15]

EditSources and Citations


Cite error: <ref> tags exist, but no <references/> tag was found




from How to of the Day https://ift.tt/2HnJkvY
via Peter

Monday, 4 June 2018

How to Prune Knockout Roses

Knockout roses are a relatively low-fuss variety that can make a welcome addition to any yard or garden, but they do require a little seasonal pruning in order to grow healthy and beautiful. Cut back your roses extensively at the beginning of spring, and shape them up as needed throughout the rest of the year. Give them one final light pruning before they go into dormancy and they’ll be ready to return full force the next year.

EditSteps

EditPruning Roses Correctly

  1. Grab a pair of sharp bypass pruners. Bypass pruners cut like scissors, making them preferable to anvil-type pruners, which have a tendency to crush the stems as they cut. Nice, clean cuts are essential to maintaining the health of the plant.[1]
    Prune Knockout Roses Step 1 Version 3.jpg
    • If you don’t have a pair of pruners handy, you could also use full-sized hedge clippers or trimmers. Whatever tool you use should be nice and sharp and able to make clean cuts.
    • When you need to cut canes larger than about in diameter, switch to a set of larger loppers.[2]
    • Disinfect pruners with rubbing alcohol or bleach diluted with water to sterilize them.
  2. Wear gloves to protect your hands and arms. In order to prune your knockout roses safely and effectively, you’ll need to pull on a pair of rugged elbow-length gardening gloves. Your gloves should be thick enough to safeguard your skin from any thorns growing on the bushes.[3]
    Prune Knockout Roses Step 2 Version 3.jpg
    • Don’t attempt to prune your knockout roses without some kind of protective covering—a pair of standard wrist-length gardening gloves is better than nothing.
  3. Disinfect your pruners before you get started. While you’re pruning your roses, stop periodically to dip them into a container filled with cleaning solution. Any all-purpose household cleaner will do the trick. Making sure your cutting blades are properly sanitized lowers your chances of accidentally spreading disease from one plant to another.[4]
    Prune Knockout Roses Step 3 Version 3.jpg
    • Get in the habit of disinfecting your pruners regularly, whether you’re trimming a little or a lot.
    • Alternatively, you can use a solution made up of 70% rubbing alcohol diluted in water.
  4. Cut the canes at a 45-degree angle. Make your cuts roughly above an outward facing bud, with the slant pointing away from the bud. This helps promote new growths to grow outward rather than inward. This technique should be used regardless of the time of year or size of the growth you’re pruning.[5]
    Prune Knockout Roses Step 4 Version 3.jpg
    • Angled cuts help water run off the stem and reduces the chance of fungal rot.
    • Cutting too close to the bud could shock it, while cutting too far away might leave too much old growth behind, forcing the plant to direct valuable resources to canes that are no longer able to produce new buds.

EditPerforming Major Pruning in Early Spring

  1. Wait until the second or third season of growth to cut back your roses. By holding off until your roses have neared their full size, you can ensure that they’ll be able to withstand having whole sections removed. A mature knockout rose should be about tall by wide before you begin hacking at it.
    Prune Knockout Roses Step 5 Version 3.jpg
    • A fully-grown knockout rose will require the most pruning around mid-February to early March. Young roses, by contrast, only need to be touched up throughout the growing period to remove dead or dying growth.[6]
    • Knockout roses can often go as long as 2-3 years between major prunings, depending on how rapidly they grow and how big or small you like to keep your plant.
  2. Prune your roses as soon as the buds break dormancy. Look for small buds to begin forming along the stems of the plant. If the existing buds have swelled up but no new growth has appeared, it means the roses are ready to prune.[7]
    Prune Knockout Roses Step 6 Version 3.jpg
    • The main pruning period for knockout roses is in late winter or early spring, just as the plant prepares for another season of growth.[8]
    • You can still prune your roses even if new growth has already begun. Buds might start forming early if the winter was especially mild. In this case, snip the growth back to the first dormant bud.
  3. Start by cutting away overlapping canes. Clip one or both canes as needed to get the plant’s interior structure growing straight and vertical. Creating some separation between the canes prevents them from rubbing against one other, making the plant look neater and promoting stronger, more lasting growth.[9]
    Prune Knockout Roses Step 7 Version 3.jpg
    • By reducing the density of your rose bushes early in the season, you can make sure they continue putting out neat, attractive growth all year long.
    • Thinning out overlapping canes and stems also promotes better air circulation through your rose bushes, making them less vulnerable to fungal diseases.[10]
  4. Remove one-third to one-half of the plant’s overall size. You can cut healthy shoots back considerably without worrying about harming the plant. Doing so will prevent your roses from putting too much energy into maintaining an overabundance of foliage. As a result, it will produce more flowers.[11]
    Prune Knockout Roses Step 8 Version 3.jpg
    • Keep in mind that your knockout roses will grow vigorously after being pruned. As a general rule, you’ll want to cut them shorter than you would ultimately like them to end up.[12]
    • Be careful not to get too overzealous with your pruning. Trimming more than half of the healthy, mature canes could cause the plant to struggle to regrow lost foliage, stunting its growth.
  5. Trim your bushes to the desired height and width. Maintain the appearance of your knockout roses by giving them a gently rounded, dome-like shape. Be sure to snip any stems or offshoots that extend far enough beyond the foliage on the outer edges of the bush to stand out.[13]
    Prune Knockout Roses Step 9 Version 3.jpg
    • To improve air circulation and control the spread of diseases in warmer weather, try trimming your bushes into a rough ‘V’ shape, leaving them open in the middle.[14]

EditMaintaining Your Roses During Late Spring and Summer

  1. Do some corrective pruning throughout the peak growing season. Shaping up your rose bushes sporadically as they fill out will encourage them to put more of their resources toward producing beautiful new buds. With a little attention here and there, you’ll begin to see more dramatic flower production by the time the days start getting shorter.
    Prune Knockout Roses Step 10 Version 3.jpg
    • Avoid heavy prunings during the heat of the summer. Your roses will already be somewhat stressed due to the heat, so losing too much healthy growth only weakens them further.
  2. Remove damaged and diseased wood. Any sections of the plant showing signs of disease should be dealt with immediately to prevent the condition from spreading. Similarly, old, brittle wood invites harmful pests, fungi, and bacteria to attack the plant, and should also be cut back as soon as possible.[15]
    Prune Knockout Roses Step 11 Version 3.jpg
    • Throughout the growing season, the primary purpose of pruning is to keep your roses healthy and active. This can be achieved by removing any unhealthy-looking parts of the plant that could become an issue if left alone.
  3. Deadhead dead and dying blooms to extend the bloom season. Deadheading is the practice of snipping off spent or failing flowers in order to make room for new ones. Snip the stem down to first group of five leaflets below the flower cluster. In a few short weeks, another round of blooms will appear in their place.[16]
    Prune Knockout Roses Step 12 Version 3.jpg
    • In most cases, you’ll be making your cuts approximately below the flowers themselves.
    • During extreme heat, only cut back to the first set of leaves rather than going further down the stem.
    • Deadheading is essential for improving both the health and aesthetic quality of your knockout roses.
  4. Aim for a uniform appearance. If a few fast-growing shoots exceed the length of the surrounding shoots, trim the longer sections to restore the plant to an even length. Repeat this process on all visible sides of the bush. Otherwise, it can quickly overtake its surroundings and begin looking unruly.[17]
    Prune Knockout Roses Step 13 Version 3.jpg
    • In addition to vertical growth, new growth will also expand outward and below the plant in the spring and summer. This "leggy" undergrowth should also be kept short.

EditTrimming Your Roses Before Winter

  1. Prune 1 final time if desired before the first frost of the year. Ideally, you should aim to have your pruning done by the end of summer or the first couple weeks of fall, when the weather is still warm. Once it gets cold, new growth will begin to taper off as the plant prepares to enter dormancy.[18]
    Prune Knockout Roses Step 14 Version 2.jpg
    • Stop pruning your knockout roses in early fall at the latest. Any new growth they put out after this time may not harden off in time for winter.[19]
    • Your roses will benefit from getting a little rest before the next growing season.
  2. Clear away dead wood. Just like you did in the summer, inspect your knockout roses carefully once more to identify and cull weak, sick, or dying canes. Otherwise, disease could spread throughout the bush unchecked, kill it off completely by the time winter sets in.[20]
    Prune Knockout Roses Step 15 Version 2.jpg
    • At this point, it’s advisable to remove as little of the plant’s overall size as necessary.
    • Avoid disturbing younger canes. You don’t want to accidentally stimulate new growth that will just die off and weaken the plant.[21]
  3. Reduce the overall height of your rose bushes. Just before your roses retire for the season, you can trim up to one-third off their total height. Focus on excess growth that doesn’t contribute to the general shape of the bush. If there are any long, non-flowering stems sticking out from the top or sides, be sure to see to these as well.[22]
    Prune Knockout Roses Step 16 Version 2.jpg
    • If your roses just barely managed to reach their ideal height during the peak growing season, a little light corrective pruning will be best.
    • Fall pruning is not a major ordeal, and many gardeners even choose to skip it altogether.

EditTips

  • Knockout roses can triple in size during their peak growing season. Keep this in mind when deciding on a preferred height and shape for your bushes.
  • Rather than simply discarding clipped canes that boast attractive flowers, stick them in a vase and put them on display in your home.
  • Have a wheelbarrow on standby to haul off your clippings when you’re done.

EditThings You'll Need

  • Bypass pruners
  • Hedge clippers, trimmers, or loppers (optional)
  • Elbow-length gardening gloves
  • Cleaning solution (for disinfecting pruners)

EditSources and Citations


Cite error: <ref> tags exist, but no <references/> tag was found




from How to of the Day https://ift.tt/2LkNbfF
via Peter
$3 Per Year Web Hosting